Guide - MSI B360 Gaming Arctic (Catalina)

[MaLd0n]

[ref]honghd1993[/ref], u can follow it for all mobos, just don't use same DSDT, the other files is same, same procedure

[onemanosx]

[ref]honghd1993[/ref], should not have major differences. Except that you are using an NVIDIA GPU? Mojave has no Nvidia webdrivers as of this date. You may want to try High Sierra instead.

Also what MaLd0n said.

[honghd1993]

I use nvidia 1070 ti

Added in 1 minute 11 seconds:

guide me install

[onemanosx]

nvidia 1070 ti

Nvidia graphics not supported in Mojave at this time.

[honghd1993]

Main Msi B360 gaming pro carbon

Cpu i3 8100

Vga msi 1070ti gaming x

Wifi tp-link t9e

Thanks

Added in 1 minute 19 seconds:

10.13.6

Added in 1 minute 3 seconds:

Guess I installed 10.13.6 on my motherboard thanks

[onemanosx]

Freebie!

For experimental and learning purposes, I created a custom USB injector kext for this motherboard build.

Following the guide found here https://www.hackintosh-forum.de/forum/thread/33300-kext-as-kext-can-oder-usb-3-0-ohne-usbinjectall/

How to Use:

1. Place MSI-B360-USB.kext in Clover/Kexts/Other

2. Remove UsbInjectAll.kext and any other USB injector kexts

3. Reboot!

Enjoy this fully functional kext!

Update version for port renaming

09022019-MSI-B360-USB.kext.zip

 

MSI-B360-USB.kext.zip

Edited February 8, 2019 by Guest

[onemanosx]

DSDT vs SSDT USB Injection which is better for me?

While I love the simplicity of having all patches in DSDT, but for the purpose of USB injection, it is a little tricky with this motherboard build. Just look at the previous effort in determining the correct port adr for my USB type C (read here: https://Olarila.com/forum/viewtopic.php?p=63533#p63533).

While the method works, the "jump" in adr between HS04 and SS08 is rather strange! In normal circumstances, HS04 is paired with SS04 (instead of SS08 in my case) or HS03 with SS07 where SS03 is more likely. But, its not!

So, the solution of using SSDT injection is much preferred as such that the ports are correctly addressed and DSDT is "saved" from further chaos! Plus, I am also able to conduct easier troubleshooting via table blocking if the need arises.

Look at how lovely the numbers lines up

And the SSDT sample in use

[mi.shytka]

Why are my usb3.1 not fall into xhci

Архив.zip

[onemanosx]

[ref]mi.shytka[/ref], my guess is you are using a pcie card for USB 3.1 and your motherboard only has USB 3.0. Thus the difference in your USB info tree

If you would like your system to be patched for optimisation, please post in DSDT request forum.

[mi.shytka]

Thank .

Usb3.1 built-in, try to ask for MaLd0n.

Added in 13 minutes 23 seconds:

Let me see your DSDT. I can do it myself.

[onemanosx]

[ref]mi.shytka[/ref], are u using a custom kext for for x99? if so, look into it and its also asmedia chip. I only did the usual xhci dsdt fix by RH thats all.

[recash168]

thanks a lot

[onemanosx]

[ref]recash168[/ref],

[onemanosx]

Ways to enable supported Wifi

One of the most common method to enable Wifi is to use kexts placed in Clover>Kexts>other.

Current kexts supporting broadcom chipset are mainly named as below:

- AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup

- Lilu.kext v1.2.5 or later (https://github.com/acidanthera/Lilu)

However, there are also other alternatives. And such alternatives makes use of

1. Clover or

2. inject wifi properties via SSDT or DSDT

Here I will just describe the Clover injection method.

There are 3 ioname devices in Mojave that will work with this method.

1. pci14e4,43ba

2. pci14e4,43a0

3. pci14e4,43a3

All we need to do is to inject either one of the id's above to the below method

Clover Injection Method 1 - Just follow the picture screenshot

Clover Injection Method 2 - pciaddr is derived from wifi's pcidebug in ioreg

That's all for today's tips and tricks! Happy Hackintoshing!

Test the methods and let me know how it works out for you!

Edited November 30, 2018 by Guest

[Sampath007]

Good job

[onemanosx]

[ref]Sampath007[/ref],

[duyseo]

Thank you!.

Your guide is great.

I have finished Mojave on my PC with same Mobo.

[onemanosx]

Thank you!.

Your guide is great.

I have finished Mojave on my PC with same Mobo.

Enjoy your hack!

[duyseo]

Hi,

I'm having problems using a same generation motherboard as the one of this guide.

I have a Gigabyte B360N WiFi with an i3-8100.

I want to use iGPU.

SMBIOS 18,1.

Problems related to iGPU in Mohave.

On High Sierra on this motherboard you have the frame buffet issue that is somehow solved with 3 KextToPatch entries.

But in the end you get acceleration in High Sierra.

I was hoping your guide would help but it doesn't.

I did some testing to try and find out the setting but I'm unable to get acceleration working.

Inject Intel: yes - ig-platform-id: 59120000 - FakeID: empty = OS Loads, No Acceleration, 31MB Video Memory

Inject Intel: yes - ig-platform-id: 59120000 - FakeID: 59128086 = System reboots at Apple Logo

Inject Intel: yes - ig-platform-id: 3E910003 - FakeID: 3E918086 = System reboots at Apple Logo

Inject Intel: yes - ig-platform-id: 3E910003 - FakeID: empty = System reboots at Apple Logo

Inject Intel: yes - ig-platform-id: 3E920003 - FakeID: 3E928086 = System reboots at Apple Logo

Inject Intel: yes - ig-platform-id: 3E920003 - FakeID: empty = System reboots at Apple Logo

Inject Intel: yes - ig-platform-id: 3E9B0007 - FakeID: 3E9B8086 = System reboots at Apple Logo

Inject Intel: yes - ig-platform-id: 3E9B0007 - FakeID: empty = System reboots at Apple Logo

Basically you load the OS only on 59120000 but with no acceleration.

Any help is woelcome.

Hi,in my cases have uncheck inject-intel to get uhd630 work.

Hope it help for you!

[onemanosx]

[ref]duyseo[/ref], can you share the smbios u used?

[duyseo]

Sure.

I used 18.1 smbios.

When i check inject intel ,after boot my display has disconnected.

I uncheck inject intel ,my display works.

Edited December 6, 2018 by Guest

[onemanosx]

[ref]duyseo[/ref], awesome! Thanks for the share. Connected using DP or Dvi?

[duyseo]

[ref]duyseo[/ref], awesome! Thanks for the share. Connected using DP or Dvi?

I connected using DP.

i couldn't do it without your guide.

And somethings i want to share : I can not boot after update bios with lasted version.I thought this is a bug of MSI mainboard because I have seen this when i use MSI b360m mortar . They show same message and can not boot.

[onemanosx]

[ref]duyseo[/ref], thats funny. I updated bios and still bootable. But, the new acpi tables cannot be extracted properly. In any case, the bios update has no major impact and no need to be alarmed

Great to knw the guide helps and double glad to know someone else is also using the same mobo!

[onemanosx]

Update: Installed M.2 as System Drive

So, I got myself a rather good deal on an M.2 SSD the past week and the mailman finally delivered the package to my doorstep. Wasted no time to install the 512GB ssd and cloned over using CCC (need I mention a fast clone process? )

Rebooted and Trim function is native i.e no need for patch. I am a happy man!

This is not the first M.2 ssd I bought off Aliexpress by the way. The first one I bought and installed it on my laptop is very much alive.

Anyone with the same cpu spec (or not) and using NVME may share their benchmark and are welcomed to do so for comparative purpose.

Here is the link to the online store I bought from: https://www.aliexpress.com/item/KingSpec-SSD-M-2-120gb-240gb-512gb-M2-SSD-pcie-NVMe-128GB-256GB-2280-PCIE-SSD/32848244315.html?spm=a2g0s.9042311.0.0.43424c4dpBYprm