Mojave 10.14

[MaLd0n]

mobo H170M-E D3, cpu i3-6100, graphics HD530.

installer hangs at point shown in picture. updated clover to 4533. it still hangs at the same point.

u try with -x(safe mode)?

[zeg66]

Hello Mald0n, I tried with -x and it reboots very soon, probably some KP, it all happens too fast.

[MaLd0n]

Hello Mald0n, I tried with -x and it reboots very soon, probably some KP, it all happens too fast.

press O key, go to Graphics and uncheck InjectIntel

[zeg66]

it is already unchecked. I have a good working 10.13.5 installation on the same hardware (mechanical hard disk, HFS+J). Could I copy some files from it to the 10.14 usb to help it get past this problem?

[MaLd0n]

if stay uncheck, check and clover inject a properties

[zeg66]

I set FakeID=0x12345678 and it worked. I have now installed it on an apfs ssd. What should I do post-install?

[MaLd0n]

I set FakeID=0x12345678 and it worked. I have now installed it on an apfs ssd. What should I do post-install?

same files from High Sierra

u can check here too

http://Olarila.com/forum/viewtopic.php?f=50&t=6254

[zeg66]

I can no longer mount the EFI partition with "diskutil mount /dev/disk0s1"

there are no audio devices running (Realtek® ALC887-VD2 8-Channel High Definition Audio CODEC)

graphics are too slow and choppy, screen fonts are, well....

not sure how to patch DSDT's

[MaLd0n]

try with clover configurator last version

[zeg66]

Thank you Mald0n, I tried Clover Configurator too. Still no sound. Update: The system boots with no Clover BootArgs at all. I can mount EFI partition OK. For audio: the method I used for 10.13.3, 10.13.4, 10.13.5 does _not_ work with 10.14 (Lilu, AppleALC, HDEF/HDAS, Inject 2, ResetHDA). Graphics show _no_ transparency and are sometimes very slow. However the system appears quite fast and shuts down instantly, good.

[MaLd0n]

Thank you Mald0n, I tried Clover Configurator too. Still no sound. Update: The system boots with no Clover BootArgs at all. I can mount EFI partition OK. For audio: the method I used for 10.13.3, 10.13.4, 10.13.5 does _not_ work with 10.14 (Lilu, AppleALC, HDEF/HDAS, Inject 2, ResetHDA). Graphics show _no_ transparency and are sometimes very slow. However the system appears quite fast and shuts down instantly, good.

YES, is my principal system now, beta 1 Mojave xD

[zeg66]

But the trick is to make it work on much lower cost hardware, like mine for example, or even lower, if possible

[MaLd0n]

send me ur clover folder, ioreg and dsdt

[jihamine]

hi, thank u for all you do , I can not download Mac OS Mojave 14 beta in App Store I receive this message this version of Mac OS can not be installed on this computer

my config is

high Sierra 10.13.6 beta

hp prebook 4530s I 5

ram 8giga

intel hd 3000

thank's a lot

[MaLd0n]

hi, thank u for all you do , I can not download Mac OS Mojave 14 beta in App Store I receive this message this version of Mac OS can not be installed on this computer

my config is

high Sierra 10.13.6 beta

hp prebook 4530s I 5

ram 8giga

intel hd 3000

thank's a lot

http://Olarila.com/forum/viewtopic.php?f=51&t=6399

[zeg66]

Thank you. Did you get them?

[MaLd0n]

Thank you. Did you get them?

i'll check tmorrow

[zeg66]

hp prebook 4530s I 5

What a coincidence. I too have an i5 equipped HP Probook 4530s but I never thought it could be turned into a hackintosh. Run Windows 7 on it. Does your USB3 port and SD Card Reader work with macOS?

[MaLd0n]

what processor model? i5...

[zeg66]

it's a Sandy Bridge i5-2540m with HD3000 graphics (in the HP Probook 4530s, if that is what you are asking).

[MaLd0n]

use Sierra

[zeg66]

Maybe I will, when I know more about macOS on laptops. Have you looked at the files I sent you?

[jihamine]

hi zeg66,i am on high Sierra 10.13.6 beta and usb3 port works after using multishit for high Sierra but sd card I did never use it cause I am not interested in it

iMessage and facetimendo not work but sleep mode and all is good

good luck and hack

[sabuhaiba]

Hello,

I have a Surface Laptop. The specifications of this laptop, I believe, are good for a hackintosh. When I start the installer, neither the keyboard nor the trackpad work. What could be the problem?

I have a keybylake CPU and chipset and my keyboard and touchpad shouw as HID Compatible devices without further details.

[MaLd0n]

Hello,

I have a Surface Laptop. The specifications of this laptop, I believe, are good for a hackintosh. When I start the installer, neither the keyboard nor the trackpad work. What could be the problem?

I have a keybylake CPU and chipset and my keyboard and touchpad shouw as HID Compatible devices without further details.

u can try a voodoops2 or ApplePS2SmartTouchPad