Hackintosh Guide - Sierra / High Sierra / Mojave / Catalina on Serie 100/200/300/400 with Clover Bootloader

[Allan 5]

Than started the notebook on which is running W7 and tryed to see any executable file on your zipped folder.

The app "RunMe" it's only for macOS.

[Olarillos 0]

Ok, I asked from beginning, if someone can light up my mind on how proceed to install macOS into my clevo machine. It's about 3 months already that I'm searching around but still didn't found how get this job done. A friend on an hackintosh group advised me to join this blog... so I'm here .

I would really appreciate your teaching about

[MaLd0n 1,001,053]

Ok, I asked from beginning, if someone can light up my mind on how proceed to install macOS into my clevo machine. It's about 3 months already that I'm searching around but still didn't found how get this job done. A friend on an hackintosh group advised me to join this blog... so I'm here .

I would really appreciate your teaching about

what hardware?

[Olarillos 0]

That's the hardware:

Clevo D900 (Yorkfield Intel core2 Extreme X9650... plus Nvidia geforce 8800M gtx (2 times in SLI)... ChipsetP965/G965 and southbridge 82801HB/HR),

Thank you

[MaLd0n 1,001,053]

That's the hardware:

Clevo D900 (Yorkfield Intel core2 Extreme X9650... plus Nvidia geforce 8800M gtx (2 times in SLI)... ChipsetP965/G965 and southbridge 82801HB/HR),

Thank you

http://Olarila.com/forum/viewtopic.php?f=50&t=6256

[Olarillos 0]

If I understand correctly, should follow these steps:

1)Download image of sierra

2)burn it and install on my hdd

3)run your RunMe-app and send you the results

Is it that right ?

[MaLd0n 1,001,053]

If I understand correctly, should follow these steps:

1)Download image of sierra

2)burn it and install on my hdd

3)run your RunMe-app and send you the results

Is it that right ?

yes

post there. LGA 775 topic

[Olarillos 0]

Good Morning Sir,

just a practice question: have downloaded raw image of High Sierra. My understanding is that that's an image and not an installation disk that will start installing mac OS once starting up my pc. Do I'm wrong?

If so, I do have to use W32 image to create an installation USB stick and than install from there ?

Than after installed should I use your RunMe.app?

Thank you and please excuse me for some other questions will arise

[artur-pt 10,321]

hello

that is right

good luck

[dedicahyadi 1]

Hi Maldon, can you help me to fix or check my clover?

My specs is :

Laptop Asus A456URK

Intel Core i5 7200U

Intel HD Graphics 620

Nvidia Disable

4GB Ram

HDD HFS+

I'm running High Sierra 10.13.4

Thanks in advance

https://drive.google.com/open?id=1fnorfLLENLefIXq7GEpGQWcJ5mynT01f

[MaLd0n 1,001,053]

Hi Maldon, can you help me to fix or check my clover?

My specs is :

Laptop Asus A456URK

Intel Core i5 7200U

Intel HD Graphics 620

Nvidia Disable

4GB Ram

HDD HFS+

I'm running High Sierra 10.13.4

Thanks in advance

NOT A UNTOUCHED TABLES

CLOVER.zip

[rob88v 0]

@MaLd0n I will be upgrading to a z370 Aorus Gaming 5 board and an 8700K once it arrives tomorrow. I wanted to know if it is possible to make a DSDT for this board. I will send my RunMe results once I have everything up and running tomorrow evening. Thank you in advance for all the amazing work you do.

[MaLd0n 1,001,053]

@MaLd0n I will be upgrading to a z370 Aorus Gaming 5 board and an 8700K once it arrives tomorrow. I wanted to know if it is possible to make a DSDT for this board. I will send my RunMe results once I have everything up and running tomorrow evening. Thank you in advance for all the amazing work you do.

k

just send me

[gagaraz 1]

Hi MaLd0n.

Please help me to set config.plist + error dsdt RehabMan-MaciASL-2018-0507.zip (site insanelymac [Guide] Sierra / High Sierra on the series 100/200/300 / SkyLake / KabyLake / CoffeeLake-DSDT series) MaLd0n Asus ROG STRIX Z370 F Gaming.zip

Extract the origin of the F4 boot clover + RunMe.app

https://www99.zippyshare.com/v/nsQcczrH/file.html

Help me solve the problem .

[MaLd0n 1,001,053]

Hi MaLd0n.

Please help me to set config.plist + error dsdt RehabMan-MaciASL-2018-0507.zip (site insanelymac [Guide] Sierra / High Sierra on the series 100/200/300 / SkyLake / KabyLake / CoffeeLake-DSDT series) MaLd0n Asus ROG STRIX Z370 F Gaming.zip

Extract the origin of the F4 boot clover + RunMe.app

https://www99.zippyshare.com/v/nsQcczrH/file.html

Help me solve the problem .

u have a dsdt full patched

DSDT.aml.zip

[gagaraz 1]

thank you for your answer

[877 0]

Hi MaLd0n,

Thanks for the great guide and all the information you provide. My Hackintosh is working with ethernet and sound, I think sleep is broken as I had a random restart...

This is what I have done so far by following this guide:

-Installed HS 10.13.4 from Olarila image.

-Installed Clover 2.4 r4458

-MausiEthernet.kext for ethernet (working)

-SATA-RAID-unsupported.kext so I could install to SSD (it was not showing up)

-Sound (working already)

-WebDriver-387.10.10.10.30.106 for GTX1080 (working)

 

Send me Chriss-iMac.zip

F4 Clover ChrisiMac.zip

 

Many thanks

[MaLd0n 1,001,053]

Hi MaLd0n,

Thanks for the great guide and all the information you provide. My Hackintosh is working with ethernet and sound, I think sleep is broken as I had a random restart...

This is what I have done so far by following this guide:

-Installed HS 10.13.4 from Olarila image.

-Installed Clover 2.4 r4458

-MausiEthernet.kext for ethernet (working)

-SATA-RAID-unsupported.kext so I could install to SSD (it was not showing up)

-Sound (working already)

-WebDriver-387.10.10.10.30.106 for GTX1080 (working)

CLOVER.zip

[877 0]

Wow thanks for the quick reply. I'll leave it running now and see if it comes out of sleep ok.

About this Mac > iMac Pro (2017), CPU shows as "3.7 GHz 6-Core Intel Xeon E5" where it should be 8700K, shall I manually edit .string file?

Ta!

[MaLd0n 1,001,053]

Wow thanks for the quick reply. I'll leave it running now and see if it comes out of sleep ok.

About this Mac > iMac Pro (2017), CPU shows as "3.7 GHz 6-Core Intel Xeon E5" where it should be 8700K, shall I manually edit .string file?

Ta!

8700k only manual edit, not good, some updates broke it, just a cosmetic

[877 0]

8700k only manual edit, not good, some updates broke it, just a cosmetic

 

So I left the mac on and it went to screensaver, then black screen. Then by itself it rebooted.

Possibly a bios setting?

[MaLd0n 1,001,053]

So I left the mac on and it went to screensaver, then black screen. Then by itself it rebooted.

Possibly a bios setting?

first, u need disable hibernate

http://Olarila.com/files/Utils/disablehibernate.command.zip

[877 0]

first, u need disable hibernate

http://Olarila.com/files/Utils/disableh ... ommand.zip

 

Thanks you, I will leave it running now and see how it goes.

One last thing, I have too many boot options:

">

Which is best method to remove them?

[pernacabeluda 1]

Use GUI/Hide

https://clover-wiki.zetam.org/Configuration/GUI#gui_hide

This should hide most of them

        <key>GUI</key>
       <dict>
               <key>Hide</key>
               <array>
                       <string>Preboot</string>
               </array>

 

You may also want to hide "Recovery".

[877 0]

Use GUI/Hide

https://clover-wiki.zetam.org/Configura ... I#gui_hide

 

Thank you pernacabeluda I will try that now, how best to find the correct GUID info?

I tried this but it does not hide the option (copied guid from Clover- space bar):

PS how to make CODE box like you

Hide

FileVault Prebooter

HD(2,GPT,30FFF746-CE96-4B49-A944-74850C4EA960)