Hackintosh Guide - Sierra / High Sierra / Mojave / Catalina / BigSur on Serie 100/200/300/400 with Clover Bootloader

[metalzone]

Pessoal tenho uma b360m ds3h + i38100 nao estou conseguindo de jeito maneira habilitar a aceleracao, Alguma luz???

[MaLd0n]

[ref]metalzone[/ref], https://Olarila.com/forum/viewtopic.php?f=62&t=9275

[metalzone]

MaLd0n

metalzone, viewtopic.php?f=62&t=9275

 

já fiz todas as combinacoes possíveis neste procedimento, alguns kext específico na pasta other?

[MaLd0n]

[ref]metalzone[/ref], veja qual o platform-id nativo e injete o mais "próximo" do seu, o app tem muitos

[metalzone]

metalzone, veja qual o platform-=id nativo e injete o mais "próximo" do seu, o app tem muitos

 

Na verdade estava fazendo tudo certo... porem não tinha video no hdmi e ainda não tenho... liguei um cabo vga e entro no sistema com aceleração... como faço pra sair no hdmi? tem haver com os conectores no Hackintool?

[MaLd0n]

[ref]metalzone[/ref], abre o app, vai no menu "Patch/System Config", tem muitos exemplos lá

[esata]

"First...

If you need DSDT edits for SkyLake, KabyLake or CoffeeLake...

-Reboot and extract original tables, press F4 in Clover boot screen, files generated in Clover

-Run it and send me files

RunMe.app"

Tenho que fazer isso antes de instalar?

[amoloxo90]

I have downloaded the file CLOVER.SERIES.100.200.300.

Create USB Boot Mac successfully.

Successfully installed. But such an error

Can you help

[MaLd0n]

[ref]amoloxo90[/ref],

--Run_Me

RunMe.app

[amoloxo90]

Sorry MaLd0n.

I downloaded the file CLOVER.SERIES.100.200.300.Good use when installing MacOS10.13.6 version

When I installed Mojave, the first unusual thing was the installation step was suspended.Cannot move mouse or any operation.If you reset the device, you will get the same error. I tried to recreate the installer up to eight times. But the results are all the same. I think it could be caused by fileCLOVER.SERIES.100.200.300

Thank you

[MaLd0n]

[ref]amoloxo90[/ref], the prroblem is a b360 chipset, need patch DSDT

the clover folder serie 100/200/300 is for post installation with full dsdt edited, no installer usb

[Flo Rin]

Hello [ref]MaLd0n[/ref],

could you please help me and take a look at my files.

I just updated my bios to a new version.

The actual DSDT is from the previous bios version.

Gigabyte Z370N+BCM94360CS2

i5-8600K

SAPPHIRE RX580 PULSE 8GB

Mojave 10.4.4

Thank you very much!

Send me iMac.zip

[MaLd0n]

[ref]Florin_[/ref], use full EFI, reboot, check if all usb work

EFI.zip

[Sinanx]

Hi Maldon,

Thanks for your work !

I have some issue with my config , if you can help me !

Thanks a lot !

Send me DESKTOP-E9IN0ME.zip

[MaLd0n]

[ref]Sinanx[/ref], replace full EFI

EFI.zip

Run it

https://Olarila.com/files/Utils/nvidia-update.command.zip

Put it in ur desktop and run repair.command inside folder

https://Olarila.com/files/Utils/RepairPermissions.zip

Reboot

[Flo Rin]

Florin_, use full EFI, reboot, check if all usb work

Thank you for your help.

USB is working fine but with the now EFI I get this error:

ACPI Exception: AE_BAD_PARAMETER,

(AppleACPIPlatform) ACPI Exception: AE_BAD_PARAMETER,

(AppleACPIPlatform) Could not install PciConfig handler for Root Bridge PCI0

(AppleACPIPlatform) Could not install PciConfig handler for Root Bridge PCI0

(AppleACPIPlatform) (20160930/evrgnini-339)

(AppleACPIPlatform) (20160930/evrgnini-339)

I have CSM enabled in my bios. Do you think is related with this?

Thank you.

Added in 7 minutes 59 seconds:

Sorry I forget to add the log files.

Send me iMac.zip

[Sinanx]

Thanks Maldon for your help !

But when I try to boot , I'm still stuck on "kextd stalled"

[MaLd0n]

[ref]Florin_[/ref], use it

DSDT.aml.zip

just ignore lines above

Added in 39 seconds:

[ref]Sinanx[/ref], check if u have some hackintosh kexts in library/extensions or system/library/extensions, u don't need it

[Sinanx]

Thanks for your help , Everything works .

But on PCIList ( on DPCIManager) I see the processor is a " Xeon-E3-1200 v5/E3-1500 v5/6th Gen Core Processor" but I have a " I5-6600" is that normal ?

Thanks again !

[MaLd0n]

[ref]Sinanx[/ref], yes, is common, from pci ids

[Sinanx]

Ok , Thanks !

[MaLd0n]

[ref]Sinanx[/ref],

[Flo Rin]

Florin_, use it

DSDT.aml.zip

(31.39 KiB) Downloaded 1 time

just ignore lines above

Thank you very much for your help.

The error is still there but all other thinks are OK.

[MaLd0n]

[ref]Florin_[/ref],

[hoangtuau]

Hi guy,

i'm have error when setup High Sierra 13.6.3

https://drive.google.com/file/d/0B8f4V5e3uW22YnlTSTRXMDUwM2RyR2YtMnRkMXJON0ZzWXNN/view

please help me!