xema Posted February 1, 2017 Share Posted February 1, 2017 Today I put usb cable into usb port on my computer and it reboot. Sometimes it has happened, but it is always loading took place normally. But not today! After it clover not loading normally! It freeze at logo, I have tryed a lot of versions and no change. Photo That's all. Logs: 0:100 0:100 MemLog inited, TSC freq: 3599999211 0:100 0:000 0:100 0:000 Now is 1.2.2017, 9:43:57 (GMT) 0:100 0:000 Starting Clover revision: 3766 on American Megatrends EFI 0:100 0:000 Build with: [Args: -x64 -D DISABLE_LTO -t XCODE5 | -D DISABLE_LTO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 9 | OS: 10.11.6 | XCODE: 7.3.1] 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,8C9BC4F4-E090-482E-B1B1-747AEF424E97,0x28,0x64000) @C8A76218 0:100 0:000 SelfDirPath = \EFI\BOOT 0:100 0:000 === [ Get Smbios ] ======================================== 0:100 0:000 Total Memory Slots Count = 4 0:100 0:000 Type 17 Index = 0 0:100 0:000 Ignoring insane frequency value 0MHz 0:100 0:000 SmbiosTable.Type17->Speed = 0MHz 0:100 0:000 SmbiosTable.Type17->Size = 0MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0 0:100 0:000 SmbiosTable.Type17->Vendor = <null string> 0:100 0:000 SmbiosTable.Type17->SerialNumber = <null string> 0:100 0:000 SmbiosTable.Type17->PartNumber = <null string> 0:100 0:000 Type 17 Index = 1 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 8192MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1 0:100 0:000 SmbiosTable.Type17->Vendor = Kingston 0:100 0:000 SmbiosTable.Type17->SerialNumber = 0F1ADFEB 0:100 0:000 SmbiosTable.Type17->PartNumber = KHX1600C9D3/8GX 0:100 0:000 Type 17 Index = 2 0:100 0:000 Ignoring insane frequency value 0MHz 0:100 0:000 SmbiosTable.Type17->Speed = 0MHz 0:100 0:000 SmbiosTable.Type17->Size = 0MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0 0:100 0:000 SmbiosTable.Type17->Vendor = <null string> 0:100 0:000 SmbiosTable.Type17->SerialNumber = <null string> 0:100 0:000 SmbiosTable.Type17->PartNumber = <null string> 0:100 0:000 Type 17 Index = 3 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 8192MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1 0:100 0:000 SmbiosTable.Type17->Vendor = Kingston 0:100 0:000 SmbiosTable.Type17->SerialNumber = 7A21DD31 0:100 0:000 SmbiosTable.Type17->PartNumber = KHX1600C9D3/8GX 0:100 0:000 Boot status=0 0:100 0:000 Running on: 'MS-7850' with board 'Z97 PC Mate(MS-7850)' 0:100 0:000 === [ GetCPUProperties ] ================================== 0:100 0:000 CPU Vendor = 756E6547 Model=306C3 0:100 0:000 got cores from CPUID_1 = 0 0:100 0:000 The CPU supported turbo 0:100 0:000 BrandString = Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz 0:100 0:000 MSR 0xE2 before patch 1E008400 0:100 0:000 MSR 0xE2 is locked, PM patches will be turned on 0:100 0:000 MSR 0xE4 00021814 0:100 0:000 MSR 0xCE 00080838_F3012400 0:100 0:000 non-usable FLEX_RATIO = 10000 0:100 0:000 corrected FLEX_RATIO = 0 0:100 0:000 FSBFrequency=100MHz DMIvalue=100000kHz 0:100 0:000 Corrected FSBFrequency=100MHz 0:100 0:000 Vendor/Model/Stepping: 0x756E6547/0x3C/0x3 0:100 0:000 Family/ExtFamily: 0x6/0x0 0:100 0:000 MaxDiv/MinDiv: 36.0/8 0:100 0:000 Turbo: 38/39/40/40 0:100 0:000 Features: 0xBFEBFBFF 0:100 0:000 Threads: 8 0:100 0:000 Cores: 4 0:100 0:000 FSB: 100 MHz 0:100 0:000 CPU: 3600 MHz 0:100 0:000 TSC: 3600 MHz 0:100 0:000 PIS: 400 MHz 0:100 0:000 === [ GetDevices ] ======================================== 0:100 0:000 PCI (00|00:00.00) : 8086 0C00 class=060000 0:100 0:000 PCI (00|00:01.00) : 8086 0C01 class=060400 0:100 0:000 PCI (00|01:00.00) : 10DE 104A class=030000 0:100 0:000 - GFX: Model=Asus GeForce GT 610 family 1FF (Nvidia) 0:100 0:000 PCI (00|01:00.01) : 10DE 0E08 class=040300 0:100 0:000 - HDMI Audio: 0:100 0:000 PCI (00|00:02.00) : 8086 0412 class=030000 0:100 0:000 - GFX: Model=Intel HD Graphics 4600 (Intel) 0:100 0:000 PCI (00|00:03.00) : 8086 0C0C class=040300 0:100 0:000 PCI (00|00:14.00) : 8086 8CB1 class=0C0330 0:100 0:000 PCI (00|00:16.00) : 8086 8CBA class=078000 0:100 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF 0:100 0:000 PCI (00|00:1A.00) : 8086 8CAD class=0C0320 0:100 0:000 PCI (00|00:1B.00) : 8086 8CA0 class=040300 0:100 0:000 PCI (00|00:1C.00) : 8086 8C90 class=060400 0:100 0:000 PCI (00|00:1C.04) : 8086 8C98 class=060400 0:100 0:000 PCI (00|03:00.00) : 197B 2363 class=010601 0:100 0:000 PCI (00|00:1C.05) : 8086 8C9A class=060400 0:100 0:000 PCI (00|04:00.00) : 10EC 8168 class=020000 0:100 0:000 - LAN: 0 Vendor=Realtek 0:100 0:000 PCI (00|00:1C.06) : 8086 244E class=060401 0:100 0:000 PCI (00|05:00.00) : 1B21 1080 class=060400 0:100 0:000 PCI (00|00:1D.00) : 8086 8CA6 class=0C0320 0:100 0:000 PCI (00|00:1F.00) : 8086 8CC4 class=060100 0:100 0:000 PCI (00|00:1F.02) : 8086 8C82 class=010601 0:100 0:000 PCI (00|00:1F.03) : 8086 8CA2 class=0C0500 0:100 0:000 === [ GetDefaultSettings ] ================================ 0:100 0:000 Clover load options size = 4 bytes 0:100 0:000 - found plist string = , parse XML in LoadOptions 0:100 0:000 - [!] xml in load options is bad 0:108 0:007 , Status=Success 0:108 0:000 EFI\CLOVER\config.plist loaded: Success 0:108 0:000 === [ GetListOfThemes ] =================================== 0:110 0:002 - [00]: embedded 0:111 0:001 - [00]: iclover 0:113 0:002 - [01]: random 0:114 0:001 === [ GetEarlyUserSettings ] ============================== 0:114 0:000 timeout set to 3 0:114 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:147 0:033 KextsToPatch: 4 requested 0:149 0:001 - [00]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC887) :: BinPatch :: data len: 4 0:161 0:011 - [01]: AppleHDA (AppleHDA/Resources/xml>zml) :: BinPatch :: data len: 6 0:167 0:006 - [02]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8 0:179 0:011 - [03]: AppleHDA (10.12-AppleHDA/Realtek ALC...) :: BinPatch :: data len: 4 0:187 0:008 Default theme: iclover 0:189 0:001 Hiding entries with string \EFI\BOOT\BOOTX64.EFI 0:190 0:001 Hiding entries with string Windows 0:197 0:006 === [ LoadDrivers ] ======================================= 0:289 0:092 Loading FSInject-64.efi status=Success 0:298 0:008 Loading OsxAptioFix2Drv-64.efi status=Success 0:303 0:005 Loading OsxFatBinaryDrv-64.efi status=Success 0:314 0:010 Loading VBoxHfs-64.efi status=Success 0:319 0:005 - driver needs connecting 0:327 0:008 1 drivers needs connecting ... 0:329 0:001 PlatformDriverOverrideProtocol->GetDriver overriden 0:330 0:001 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:594 0:263 Dump SMC keys from NVRAM: 0:599 0:004 fakesmc-key-#KEY-ui32:00 00 00 11 0:635 0:036 fakesmc-key-$Adr-ui32:00 00 03 00 0:652 0:017 fakesmc-key-$Num-ui8:01 0:657 0:004 fakesmc-key-RMde-char:41 0:662 0:004 fakesmc-key-RPlt-ch8*:6A 37 38 00 00 00 00 00 0:687 0:025 fakesmc-key-RBr -ch8*:6A 37 38 6A 37 38 61 6D 0:712 0:025 fakesmc-key-EPCI-ui32:08 00 F0 00 0:729 0:016 fakesmc-key-REV -ch8*:02 22 0F 00 00 16 0:752 0:023 fakesmc-key-BEMB-flag:00 0:757 0:004 fakesmc-key-BATP-flag:00 0:764 0:006 fakesmc-key-BNum-ui8:00 0:772 0:008 fakesmc-key-MSTc-ui8:00 0:779 0:006 fakesmc-key-MSAc-ui16:00 00 0:789 0:009 fakesmc-key-MSLD-ui8:00 0:797 0:008 fakesmc-key-MSWr-ui8:00 0:802 0:004 fakesmc-key-MSPS-ui16:00 03 0:814 0:012 fakesmc-key-MSFW-ui8:01 00 0:829 0:015 === [ InitScreen ] ======================================== 0:922 0:092 SetScreenResolution: 1920x1080 - setting Mode 4 1:109 0:186 Video mode change to mode #4: Success 1:110 0:001 Console modes reported: 4, available modes: 1:112 0:001 - [01]: 80x25 1:113 0:001 - [02]: 80x50 1:119 0:005 - [03]: 100x31 1:120 0:001 - [04]: 128x40 (current mode) 1:122 0:001 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,8C9BC4F4-E090-482E-B1B1-747AEF424E97,0x28,0x64000) 1:236 0:114 === [ GetMacAddress ] ===================================== 1:327 0:090 MAC address of LAN #0= D8:CB:8A:59:74:5F: 1:343 0:015 === [ ScanSPD ] =========================================== 1:446 0:102 SMBus device : 8086 8CA2 class=0C0500 status=Success 1:447 0:001 SMBus CmdReg: 0x3 1:452 0:005 Scanning SMBus [8086:8CA2], mmio: 0xF7A18004, ioport: 0xF040, hostc: 0x11 1:454 0:001 Slots to scan [8]... 1:456 0:002 SPD[1]: Type 11 @0x51 1:479 0:022 XMP Profile1: 10*1/8ns 1:481 0:002 Found module with XMP version 1.3 1:487 0:006 DDR speed 1600MHz 1:489 0:001 Slot: 1 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C9D38GX SerialNo=000F010A0D0F0E0B 1:491 0:002 SPD[3]: Type 11 @0x53 1:512 0:021 XMP Profile1: 10*1/8ns 1:514 0:002 Found module with XMP version 1.3 1:516 0:001 DDR speed 1600MHz 1:517 0:001 Slot: 3 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C9D38GX SerialNo=070A02010D0D0301 1:519 0:002 === [ GetAcpiTablesList ] ================================= 1:591 0:071 Get Acpi Tables List from RSDT: 1:596 0:005 - [00]: FACP A M I len=132 1:598 0:001 - [01]: APIC A M I len=146 1:602 0:004 - [02]: FPDT A M I len=68 1:604 0:001 - [03]: FIDT A M I len=156 1:605 0:001 - [04]: ASF! HCG len=165 1:607 0:001 - [05]: SSDT Ther_Rvp len=3197 1:608 0:001 - [06]: SSDT Cpu0Ist len=1337 1:610 0:001 - [07]: SSDT CpuSsdt len=2932 1:611 0:001 - [08]: MCFG A M I len=60 1:619 0:007 - [09]: HPET A M I len=56 1:621 0:001 - [10]: SSDT SataTabl len=877 1:624 0:003 - [11]: SSDT SaSsdt len=22581 1:627 0:003 - [12]: UEFI A M I len=66 1:629 0:001 - [13]: DMAR BDW len=184 1:630 0:001 - [14]: BGRT A M I len=56 1:632 0:001 Calibrated TSC frequency =3599999211 =3599MHz 1:634 0:001 === [ GetUserSettings ] =================================== 1:720 0:086 USB FixOwnership: yes 1:722 0:001 - final DSDT Fix mask=00000000 1:723 0:001 ChassisType: 0x6 1:725 0:001 Using smbios.plist at path: EFI\CLOVER\smbios.plist, Status=Not Found 1:731 0:005 === [ ScanVolumes ] ======================================= 1:820 0:088 Found 13 volumes with blockIO 1:827 0:007 - [00]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0) 1:832 0:004 Result of bootcode detection: bootable unknown (legacy) 1:833 0:001 USB volume 1:835 0:001 - [01]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\HD(1,MBR,0xBE4A60F4,0x800,0xEE7800) 1:845 0:010 Result of bootcode detection: bootable unknown (legacy) 1:847 0:001 USB volume 1:924 0:077 - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 1:928 0:004 - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0) 1:943 0:014 Result of bootcode detection: bootable Linux (grub,linux) 1:944 0:001 - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0) 1:948 0:004 - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,8C9BC4F4-E090-482E-B1B1-747AEF424E97,0x28,0x64000) 1:962 0:013 Result of bootcode detection: bootable unknown (legacy) 1:965 0:003 This is SelfVolume !! 1:967 0:001 - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,77C9FEEF-0CFF-4997-B83A-B2C0907436B7,0x64028,0x3A1EC0C0) 1:972 0:005 - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,EC56B9F2-35D2-415E-AD5D-2B370B3CE1A1,0x3A2500E8,0x135F20) 1:994 0:022 - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,3C875BF2-B993-41D2-A833-225E03A3B557,0x800,0x1401800) 2:000 0:005 - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,29DFF406-1AEA-4767-BBC5-3271EE1E7C42,0x25801F3B,0x14B82D06) 2:029 0:029 - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,0A896406-FF51-49DC-A6C9-0506F582EC5B,0x1402800,0x9FFF800) 2:036 0:006 - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,886EC1D0-C740-4439-9398-A07196BE87C7,0xB402000,0x1A3FF800) 2:040 0:003 - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,1D21A879-403C-497F-B658-956F6E0678D8,0x800,0xDF9438F) 2:048 0:008 === [ InitTheme ] ========================================= 2:141 0:093 Using theme 'iclover' (EFI\CLOVER\themes\iclover) 2:144 0:002 Warning! Character width 9 should be even! 2:146 0:002 Choosing theme iclover 2:148 0:001 after NVRAM boot-args=dart=0 2:152 0:004 === [ AddCustomLegacy ] =================================== 2:230 0:078 Scanning legacy ... 2:232 0:001 0: 'Whole Disc Boot' (legacy) not legacy 2:236 0:004 1: 'EFI' (legacy) not legacy 2:239 0:003 2: 'Whole Disc Boot' (legacy) not legacy 2:244 0:004 3: 'Whole Disc Boot' (grub,linux) add legacy 2:254 0:010 added 'Boot Linux from Whole Disc Boot' OSType=0 Icon=grub,linux 2:256 0:001 4: 'Whole Disc Boot' (legacy) not legacy 2:262 0:006 5: 'EFI' (legacy) not legacy 2:265 0:003 6: 'OSX' (legacy) not legacy 2:270 0:005 7: 'Recovery HD' (legacy) not legacy 2:273 0:003 8: 'Legacy HD1' (legacy) not legacy 2:277 0:003 9: 'Legacy HD2' (legacy) not legacy 2:287 0:010 10: 'Legacy HD3' (legacy) not legacy 2:290 0:003 11: 'Legacy HD4' (legacy) not legacy 2:295 0:005 12: '' (legacy) not legacy 2:298 0:003 === [ ScanLoader ] ======================================== 2:389 0:090 - [01]: 'EFI' 2:395 0:006 - [05]: 'EFI' 2:398 0:003 - [06]: 'OSX' 2:461 0:063 AddLoaderEntry for Volume Name=OSX 2:478 0:016 Check if volume Is Hibernated: 2:479 0:001 Check sleep image 'by signature': 2:519 0:039 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found 2:521 0:001 using default sleep image name = \private\var\vm\sleepimage 2:556 0:034 sleepimage not found -> Not Found 2:558 0:002 hibernated: no - sign 2:561 0:003 - [07]: 'Recovery HD' 2:566 0:004 AddLoaderEntry for Volume Name=Recovery HD 2:590 0:024 - [12]: '' 2:599 0:008 === [ AddCustomTool ] ===================================== 2:703 0:104 found tool \EFI\CLOVER\tools\Shell64U.efi 2:706 0:003 Checking EFI partition Volume 5 for Clover 2:707 0:001 Found Clover 2:712 0:005 === [ FindDefaultEntry ] ================================== 2:782 0:069 === [ GetEfiBootDeviceFromNvram ] ========================= 2:842 0:059 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,77C9FEEF-0CFF-4997-B83A-B2C0907436B7,0x64028,0x3A1EC0C0) 2:843 0:001 - Volume: 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,77C9FEEF-0CFF-4997-B83A-B2C0907436B7,0x64028,0x3A1EC0C0)' 2:852 0:009 - LoaderPath: '<null string>' 2:854 0:001 - Guid = 77C9FEEF-0CFF-4997-B83A-B2C0907436B7 2:855 0:001 === [ FindStartupDiskVolume ] ============================= 2:927 0:071 - Volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,77C9FEEF-0CFF-4997-B83A-B2C0907436B7,0x64028,0x3A1EC0C0) 2:929 0:001 - searching for that partition 2:930 0:001 - found entry 1. 'Boot Mac OS X from OSX', Volume 'OSX' 2:936 0:005 Boot redirected to Entry 1. 'Boot Mac OS X from OSX' 2:937 0:001 DefaultIndex=1 and MainMenu.EntryCount=9 2:939 0:001 Use anime=iClover_logo frames=4 0:100 0:100 MemLog inited, TSC freq: 3599993411 0:100 0:000 0:100 0:000 Now is 1.2.2017, 10:1:18 (GMT) 0:100 0:000 Starting Clover revision: 3766 on American Megatrends EFI 0:100 0:000 Build with: [Args: -x64 -D DISABLE_LTO -t XCODE5 | -D DISABLE_LTO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 9 | OS: 10.11.6 | XCODE: 7.3.1] 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,8C9BC4F4-E090-482E-B1B1-747AEF424E97,0x28,0x64000) @C8A96B98 0:100 0:000 SelfDirPath = \EFI\BOOT 0:100 0:000 === [ Get Smbios ] ======================================== 0:100 0:000 Total Memory Slots Count = 4 0:100 0:000 Type 17 Index = 0 0:100 0:000 Ignoring insane frequency value 0MHz 0:100 0:000 SmbiosTable.Type17->Speed = 0MHz 0:100 0:000 SmbiosTable.Type17->Size = 0MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0 0:100 0:000 SmbiosTable.Type17->Vendor = <null string> 0:100 0:000 SmbiosTable.Type17->SerialNumber = <null string> 0:100 0:000 SmbiosTable.Type17->PartNumber = <null string> 0:100 0:000 Type 17 Index = 1 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 8192MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1 0:100 0:000 SmbiosTable.Type17->Vendor = Kingston 0:100 0:000 SmbiosTable.Type17->SerialNumber = 0F1ADFEB 0:100 0:000 SmbiosTable.Type17->PartNumber = KHX1600C9D3/8GX 0:100 0:000 Type 17 Index = 2 0:100 0:000 Ignoring insane frequency value 0MHz 0:100 0:000 SmbiosTable.Type17->Speed = 0MHz 0:100 0:000 SmbiosTable.Type17->Size = 0MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0 0:100 0:000 SmbiosTable.Type17->Vendor = <null string> 0:100 0:000 SmbiosTable.Type17->SerialNumber = <null string> 0:100 0:000 SmbiosTable.Type17->PartNumber = <null string> 0:100 0:000 Type 17 Index = 3 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 8192MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1 0:100 0:000 SmbiosTable.Type17->Vendor = Kingston 0:100 0:000 SmbiosTable.Type17->SerialNumber = 7A21DD31 0:100 0:000 SmbiosTable.Type17->PartNumber = KHX1600C9D3/8GX 0:100 0:000 Boot status=0 0:100 0:000 Running on: 'MS-7850' with board 'Z97 PC Mate(MS-7850)' 0:100 0:000 === [ GetCPUProperties ] ================================== 0:100 0:000 CPU Vendor = 756E6547 Model=306C3 0:100 0:000 got cores from CPUID_1 = 0 0:100 0:000 The CPU supported turbo 0:100 0:000 BrandString = Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz 0:100 0:000 MSR 0xE2 before patch 1E008400 0:100 0:000 MSR 0xE2 is locked, PM patches will be turned on 0:100 0:000 MSR 0xE4 00021814 0:100 0:000 MSR 0xCE 00080838_F3012400 0:100 0:000 non-usable FLEX_RATIO = 10000 0:100 0:000 corrected FLEX_RATIO = 0 0:100 0:000 FSBFrequency=100MHz DMIvalue=100000kHz 0:100 0:000 Corrected FSBFrequency=100MHz 0:100 0:000 Vendor/Model/Stepping: 0x756E6547/0x3C/0x3 0:100 0:000 Family/ExtFamily: 0x6/0x0 0:100 0:000 MaxDiv/MinDiv: 36.0/8 0:100 0:000 Turbo: 38/39/40/40 0:100 0:000 Features: 0xBFEBFBFF 0:100 0:000 Threads: 8 0:100 0:000 Cores: 4 0:100 0:000 FSB: 100 MHz 0:100 0:000 CPU: 3600 MHz 0:100 0:000 TSC: 3600 MHz 0:100 0:000 PIS: 400 MHz 0:100 0:000 === [ GetDevices ] ======================================== 0:100 0:000 PCI (00|00:00.00) : 8086 0C00 class=060000 0:100 0:000 PCI (00|00:01.00) : 8086 0C01 class=060400 0:100 0:000 PCI (00|01:00.00) : 10DE 104A class=030000 0:100 0:000 - GFX: Model=Asus GeForce GT 610 family 1FF (Nvidia) 0:100 0:000 PCI (00|01:00.01) : 10DE 0E08 class=040300 0:100 0:000 - HDMI Audio: 0:100 0:000 PCI (00|00:02.00) : 8086 0412 class=030000 0:100 0:000 - GFX: Model=Intel HD Graphics 4600 (Intel) 0:100 0:000 PCI (00|00:03.00) : 8086 0C0C class=040300 0:100 0:000 PCI (00|00:14.00) : 8086 8CB1 class=0C0330 0:100 0:000 PCI (00|00:16.00) : 8086 8CBA class=078000 0:100 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF 0:100 0:000 PCI (00|00:1A.00) : 8086 8CAD class=0C0320 0:100 0:000 PCI (00|00:1B.00) : 8086 8CA0 class=040300 0:100 0:000 PCI (00|00:1C.00) : 8086 8C90 class=060400 0:100 0:000 PCI (00|00:1C.04) : 8086 8C98 class=060400 0:100 0:000 PCI (00|03:00.00) : 197B 2363 class=010601 0:100 0:000 PCI (00|00:1C.05) : 8086 8C9A class=060400 0:100 0:000 PCI (00|04:00.00) : 10EC 8168 class=020000 0:100 0:000 - LAN: 0 Vendor=Realtek 0:100 0:000 PCI (00|00:1C.06) : 8086 244E class=060401 0:100 0:000 PCI (00|05:00.00) : 1B21 1080 class=060400 0:100 0:000 PCI (00|00:1D.00) : 8086 8CA6 class=0C0320 0:100 0:000 PCI (00|00:1F.00) : 8086 8CC4 class=060100 0:100 0:000 PCI (00|00:1F.02) : 8086 8C82 class=010601 0:100 0:000 PCI (00|00:1F.03) : 8086 8CA2 class=0C0500 0:100 0:000 === [ GetDefaultSettings ] ================================ 0:100 0:000 Clover load options size = 4 bytes 0:100 0:000 - found plist string = , parse XML in LoadOptions 0:100 0:000 - [!] xml in load options is bad 0:107 0:006 , Status=Success 0:107 0:000 EFI\CLOVER\config.plist loaded: Success 0:107 0:000 === [ GetListOfThemes ] =================================== 0:109 0:002 - [00]: embedded 0:110 0:001 - [00]: iclover 0:112 0:002 - [01]: random 0:113 0:001 === [ GetEarlyUserSettings ] ============================== 0:113 0:000 timeout set to 3 0:113 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:147 0:034 KextsToPatch: 4 requested 0:149 0:001 - [00]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC887) :: BinPatch :: data len: 4 0:157 0:008 - [01]: AppleHDA (AppleHDA/Resources/xml>zml) :: BinPatch :: data len: 6 0:165 0:007 - [02]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8 0:178 0:013 - [03]: AppleHDA (10.12-AppleHDA/Realtek ALC...) :: BinPatch :: data len: 4 0:188 0:010 Default theme: iclover 0:190 0:001 Hiding entries with string \EFI\BOOT\BOOTX64.EFI 0:191 0:001 Hiding entries with string Windows 0:193 0:001 === [ LoadDrivers ] ======================================= 0:287 0:093 Loading FSInject-64.efi status=Success 0:295 0:007 Loading OsxAptioFix2Drv-64.efi status=Success 0:300 0:005 Loading OsxFatBinaryDrv-64.efi status=Success 0:312 0:011 Loading VBoxHfs-64.efi status=Success 0:319 0:007 - driver needs connecting 0:321 0:001 1 drivers needs connecting ... 0:322 0:001 PlatformDriverOverrideProtocol->GetDriver overriden 0:324 0:001 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:595 0:271 Dump SMC keys from NVRAM: 0:599 0:004 fakesmc-key-#KEY-ui32:00 00 00 11 0:634 0:034 fakesmc-key-$Adr-ui32:00 00 03 00 0:653 0:018 fakesmc-key-$Num-ui8:01 0:660 0:006 fakesmc-key-RMde-char:41 0:665 0:004 fakesmc-key-RPlt-ch8*:6A 37 38 00 00 00 00 00 0:688 0:023 fakesmc-key-RBr -ch8*:6A 37 38 6A 37 38 61 6D 0:711 0:022 fakesmc-key-EPCI-ui32:08 00 F0 00 0:730 0:018 fakesmc-key-REV -ch8*:02 22 0F 00 00 16 0:748 0:017 fakesmc-key-BEMB-flag:00 0:755 0:007 fakesmc-key-BATP-flag:00 0:763 0:008 fakesmc-key-BNum-ui8:00 0:768 0:004 fakesmc-key-MSTc-ui8:00 0:778 0:010 fakesmc-key-MSAc-ui16:00 00 0:788 0:009 fakesmc-key-MSLD-ui8:00 0:795 0:006 fakesmc-key-MSWr-ui8:00 0:804 0:008 fakesmc-key-MSPS-ui16:00 03 0:813 0:009 fakesmc-key-MSFW-ui8:01 00 0:824 0:010 === [ InitScreen ] ======================================== 0:928 0:104 SetScreenResolution: 1920x1080 - setting Mode 4 1:116 0:187 Video mode change to mode #4: Success 1:118 0:001 Console modes reported: 4, available modes: 1:119 0:001 - [01]: 80x25 1:127 0:007 - [02]: 80x50 1:128 0:001 - [03]: 100x31 1:130 0:001 - [04]: 128x40 (current mode) 1:131 0:001 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,8C9BC4F4-E090-482E-B1B1-747AEF424E97,0x28,0x64000) 1:247 0:115 === [ GetMacAddress ] ===================================== 1:343 0:096 MAC address of LAN #0= D8:CB:8A:59:74:5F: 1:362 0:018 === [ ScanSPD ] =========================================== 1:465 0:102 SMBus device : 8086 8CA2 class=0C0500 status=Success 1:468 0:003 SMBus CmdReg: 0x3 1:470 0:001 Scanning SMBus [8086:8CA2], mmio: 0xF7A18004, ioport: 0xF040, hostc: 0x11 1:477 0:007 Slots to scan [8]... 1:479 0:002 SPD[1]: Type 11 @0x51 1:499 0:019 XMP Profile1: 10*1/8ns 1:500 0:001 Found module with XMP version 1.3 1:502 0:001 DDR speed 1600MHz 1:503 0:001 Slot: 1 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C9D38GX SerialNo=000F010A0D0F0E0B 1:505 0:002 SPD[3]: Type 11 @0x53 1:528 0:022 XMP Profile1: 10*1/8ns 1:530 0:001 Found module with XMP version 1.3 1:531 0:001 DDR speed 1600MHz 1:533 0:001 Slot: 3 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C9D38GX SerialNo=070A02010D0D0301 1:536 0:003 === [ GetAcpiTablesList ] ================================= 1:623 0:086 Get Acpi Tables List from RSDT: 1:626 0:003 - [00]: FACP A M I len=132 1:627 0:001 - [01]: APIC A M I len=146 1:635 0:007 - [02]: FPDT A M I len=68 1:637 0:001 - [03]: FIDT A M I len=156 1:638 0:001 - [04]: ASF! HCG len=165 1:640 0:001 - [05]: SSDT Ther_Rvp len=3197 1:643 0:003 - [06]: SSDT Cpu0Ist len=1337 1:646 0:003 - [07]: SSDT CpuSsdt len=2932 1:648 0:001 - [08]: MCFG A M I len=60 1:649 0:001 - [09]: HPET A M I len=56 1:651 0:001 - [10]: SSDT SataTabl len=877 1:652 0:001 - [11]: SSDT SaSsdt len=22581 1:660 0:007 - [12]: UEFI A M I len=66 1:662 0:001 - [13]: DMAR BDW len=184 1:663 0:001 - [14]: BGRT A M I len=56 1:665 0:001 Calibrated TSC frequency =3599993411 =3599MHz 1:668 0:003 === [ GetUserSettings ] =================================== 1:756 0:087 USB FixOwnership: yes 1:759 0:003 - final DSDT Fix mask=00000000 1:761 0:001 ChassisType: 0x6 1:763 0:001 Using smbios.plist at path: EFI\CLOVER\smbios.plist, Status=Not Found 1:767 0:004 === [ ScanVolumes ] ======================================= 1:866 0:098 Found 11 volumes with blockIO 1:868 0:001 - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 1:886 0:018 - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0) 1:903 0:016 Result of bootcode detection: bootable Linux (grub,linux) 1:912 0:008 - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0) 1:916 0:004 - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,8C9BC4F4-E090-482E-B1B1-747AEF424E97,0x28,0x64000) 1:928 0:012 Result of bootcode detection: bootable unknown (legacy) 1:930 0:001 This is SelfVolume !! 1:932 0:001 - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,77C9FEEF-0CFF-4997-B83A-B2C0907436B7,0x64028,0x3A1EC0C0) 1:937 0:005 - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,EC56B9F2-35D2-415E-AD5D-2B370B3CE1A1,0x3A2500E8,0x135F20) 1:960 0:023 - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,3C875BF2-B993-41D2-A833-225E03A3B557,0x800,0x1401800) 1:964 0:003 - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,29DFF406-1AEA-4767-BBC5-3271EE1E7C42,0x25801F3B,0x14B82D06) 1:968 0:003 - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,0A896406-FF51-49DC-A6C9-0506F582EC5B,0x1402800,0x9FFF800) 1:994 0:026 - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,886EC1D0-C740-4439-9398-A07196BE87C7,0xB402000,0x1A3FF800) 1:998 0:003 - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,1D21A879-403C-497F-B658-956F6E0678D8,0x800,0xDF9438F) 2:001 0:003 === [ InitTheme ] ========================================= 2:106 0:104 Using theme 'iclover' (EFI\CLOVER\themes\iclover) 2:110 0:004 Warning! Character width 9 should be even! 2:113 0:002 Choosing theme iclover 2:115 0:001 after NVRAM boot-args=dart=0 2:116 0:001 === [ AddCustomLegacy ] =================================== 2:199 0:083 Scanning legacy ... 2:201 0:001 0: 'Whole Disc Boot' (legacy) not legacy 2:210 0:009 1: 'Whole Disc Boot' (grub,linux) add legacy 2:220 0:010 added 'Boot Linux from Whole Disc Boot' OSType=0 Icon=grub,linux 2:222 0:001 2: 'Whole Disc Boot' (legacy) not legacy 2:228 0:006 3: 'EFI' (legacy) not legacy 2:235 0:006 4: 'OSX' (legacy) not legacy 2:238 0:003 5: 'Recovery HD' (legacy) not legacy 2:241 0:003 6: 'Legacy HD1' (legacy) not legacy 2:244 0:003 7: 'Legacy HD2' (legacy) not legacy 2:253 0:009 8: 'Legacy HD3' (legacy) not legacy 2:256 0:003 9: 'Legacy HD4' (legacy) not legacy 2:261 0:005 10: '' (legacy) not legacy 2:264 0:003 === [ ScanLoader ] ======================================== 2:355 0:090 - [03]: 'EFI' 2:358 0:003 - [04]: 'OSX' 2:419 0:061 AddLoaderEntry for Volume Name=OSX 2:436 0:016 Check if volume Is Hibernated: 2:437 0:001 Check sleep image 'by signature': 2:477 0:039 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found 2:479 0:001 using default sleep image name = \private\var\vm\sleepimage 2:505 0:026 sleepimage not found -> Not Found 2:507 0:002 hibernated: no - sign 2:511 0:003 - [05]: 'Recovery HD' 2:515 0:004 AddLoaderEntry for Volume Name=Recovery HD 2:539 0:024 - [10]: '' 2:548 0:008 === [ AddCustomTool ] ===================================== 2:644 0:095 found tool \EFI\CLOVER\tools\Shell64U.efi 2:645 0:001 Checking EFI partition Volume 3 for Clover 2:647 0:001 Found Clover 2:652 0:005 === [ FindDefaultEntry ] ================================== 2:724 0:072 === [ GetEfiBootDeviceFromNvram ] ========================= 2:790 0:065 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,77C9FEEF-0CFF-4997-B83A-B2C0907436B7,0x64028,0x3A1EC0C0) 2:793 0:003 - Volume: 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,77C9FEEF-0CFF-4997-B83A-B2C0907436B7,0x64028,0x3A1EC0C0)' 2:794 0:001 - LoaderPath: '<null string>' 2:802 0:007 - Guid = 77C9FEEF-0CFF-4997-B83A-B2C0907436B7 2:803 0:001 === [ FindStartupDiskVolume ] ============================= 2:880 0:076 - Volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,77C9FEEF-0CFF-4997-B83A-B2C0907436B7,0x64028,0x3A1EC0C0) 2:885 0:005 - searching for that partition 2:887 0:001 - found entry 1. 'Boot Mac OS X from OSX', Volume 'OSX' 2:888 0:001 Boot redirected to Entry 1. 'Boot Mac OS X from OSX' 2:890 0:001 DefaultIndex=1 and MainMenu.EntryCount=9 2:891 0:001 Use anime=iClover_logo frames=4 Can anyone help me with this problem. p.s. I have check partitions with osx on errors, all ok. Secondary linux os loading ok, usb ports work. Quote Link to comment Share on other sites More sharing options...
