OS X Yosemite 10.10 (14A389) bootable USB for Intel PCs

[pernacabeluda]

It would be useful for the next version if you find out which one of them is causing problem.

[musadiqmanas]

Dear @pernacabeluda, I forgot the file manager/software we used to delete files/folders from RAW image. Can u plz tell me about that? To use in Windows... Thanks.

[pernacabeluda]

It's called TransMac.

There's a link with instructions in the first post

http://Olarila.com/forum/viewtopic.php?f=31&t=3836

[musadiqmanas]

It's called TransMac.

There's a link with instructions in the first post

http://Olarila.com/forum/viewtopic.php?f=31&t=3836

 

Thanks for kind reply and sorry for stupid question.. I get it now..will try to minimize the annoying questions during my quest to install OS X 10.10 on my HP-1000 Notebook..

Regards!

[abrfilho]

Olá, baixei o torrent desta imagem, gravei num pen-drive utilizando o Image Writer, dei boot por UEFI, abriu o Clover, selecionei o Boot Install OS X porém a tela ficou preta, apaguei as kext de vídeo e o cache, tentei novamente e a tela ficou preta no mesmo ponto, o que poderia ser?

Eu tenho um ASUS K45VM

Processador Core i7 3610QM

8GB Memória RAM

Placa de Vídeo GeForce GT630M

etc etc...

[musadiqmanas]

Dear @pernacabeluda, Following the given instructions, I made bootable USB without any alteration and booted. It failed. Then I deleted kernel cache and video kexts as per given instructions and booted again. It again failed and said "..Error loading kernel cache" (image attached). I tried again by selecting option of "boot without caches", "boot without injected kexts and caches" and "boot in single user verbose mode" but all failed and showed the same screen (image attached).

Plz tell me what should I do now?

Regards!

[artur-pt]

hello

try to boot single user mode

follow on screen instructions to mount the volume

then

kextcache -prelinked-kernel

good hack

[musadiqmanas]

hello

try to boot single user mode

follow on screen instructions to mount the volume

then

kextcache -prelinked-kernel

good hack

 

I thought "single user mode" should be there in boot options but I don't see it there (image attached).

It only shows "single user verbose mode" which I've already tried to no avail as I mentioned in my last post.

If "single user mode" is something different and I have to do something other than what I'm doing, plz let me know.

Regards!

[artur-pt]

hello

yes is that

follow the instructions

good hack

[pernacabeluda]

Try using legacy boot instead of UEFI.

If Clover legacy also doesn't work, press 1 to use Chameleon, it will boot without caches.

[fbifido]

Hi,

Just trying your installer.

wait i have to tell you, I tried to get everything that will be needed to install&run yosemite. but no one would help until i install 10.10, which makes no sense.

I wanted to get all the kexts that my motherboard needed, & to have my DSDT fixed.

anyway in tried to install 10.10, and i am not sure what is the problem.

here is a video of my so call testing:

part1:

">

part2:

">

btw:

my spec is now:

msi H61M-P31/w8 (ms-7788) mother board

intel Core i3-3250 Ivy-Bridge-D 3.50GHz cpu (3rd-Gen CPU with Intel HD 2500)

8GB ram, 500GB harddrive Sata

Now looking into ozmosis for my board:

http://www.insanelymac.com/forum/topic/301407-guide-insert-ozmosis-into-uefi-bios/#entry2075373

from this info my board is using iMac 13,2

which mean my SMC version is 2.11F14. I got this info from http://www.insanelymac.com/forum/topic/269558-fakesmc-y-plugins/

I also notice this info from the same page:

- AVX verstion work only

Sandy Bridge/Ivy Bridge

Attached File FakeSMC_r615.zip 8.13MB http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=111925

I am also not sure which smc-compatible: to use for iMac 13,2.

I currently don't have any OS X install, and would like to get all the relevant info needed to mod or repair my dsdt file.

most modders are asking for IOJones files, which include .iojones & .acpi type info.

Can you help me.

Thanks.

[fbifido]

Updated my BIOS with the ozmosis mod. still not sure if it is working (the ozmosis bootloader).

anyway it can't boot your yosemite usb,

so i boot with clover off the usb and ran a few utility to get dsdt files and system info.

please see attach.

note: i am booting from your OS X Yosemite installer USB, which is using MacBookPro6,2, and my bios is using iMac13,2.

Please find attach:

https://mega.co.nz/#F!QxJwCDpA!LQN038wBwiLnBodse2p6Wg

 

[pernacabeluda]

HD 2500 is not supported in OS X, you may try to inject ig-platform-id=0x01660003 as suggested here

http://www.insanelymac.com/forum/topic/287668-guide-intel-hd2500-full-resolution-and-qeci-1083/

You can edit Clover config.plist for this

http://clover-wiki.zetam.org/Configuration/Graphics#ig-platform-id

Most likely you will have to remove graphics kexts and boot without framebuffer, boot single user (from space bar menu)

fsck -fy
mount -uw /
mkdir /kext_backup
cd /System/Library/Extensions
mv AppleIntelHD* AppleIntelFramebuffer* /kext_backup
kextcache -prelinked-kernel
reboot

[abrfilho]

Olá pernacabeluda, estava tendo problemas com o Clover em EFI, a tela ficava preta, no legacy é a mesma coisa, então dei boot com o Chameleon, ele ficou numa mensagem assim: "Still waiting for root device", dei boot pelo Chameleon utilizando USBBusFix=Yes mas deu na mesma, o que devo fazer?

[pernacabeluda]

Tenta com -gux_defer_usb2 -gux_no_idle

[abrfilho]

pernacabeluda, muito obrigado pela sua ajuda, consegui realizar minha instalação, só tive problema com a kext da nvidia.

Após instalado, estava sem som (instalei o VoodooHDA mas fica um leve chiado no fundo), o touch não funciona (instalei aquele VoodooPS2 mas nada aconteceu), as USBs não funcionam (funcionou com aquele comando que você me passou anteriormente) e estou tendo problemas com minha Intel HD 4000, ele parece que não detecta toda a memória de vídeo e o sistema fica meio lento e apresentando alguns problemas gráficos. A bateria também não aparece aqui, teria alguma coisa a ver com o Gerenciamento de Energia *ponto de interrogação* (acabei de descobrir que não consigo digitar coisas que precisam de apertar o Alt Gr no Windows)

Edit: Como eu trocaria a resolução da tela *ponto de interrogação*

O iMessage não está funcionando aqui.

[pernacabeluda]

Tudo isso você encontra no fórum, aqui não é o lugar para questionar, use o tópico correspondente para cada assunto.

[abrfilho]

Ok, obrigado

[cool_recep]

10.10.1 would be good. Thanks

[pernacabeluda]

10.10.1 would be good. Thanks

 

One of these Kexts gave me IIBluetooth error. After rmoving them, I was able to reach the installer screen.

 

It would be useful for the next version if you find out which one of them is causing problem.

[cool_recep]

It is probably GenericUSB XHCI but I will make sure today.

[cool_recep]

100% confirmation!

If there is GenericUSBXHCI.kext, there is no way to boot! Even with -gux_defer_usb2 -gux_no_idle -gux_nosleep!

You are stuck at No interval found for 8000000

Delete GenericUSBXHCI.kext and you are good to go.

I have tried all combiantion including Inject USB, USB ownership... No... GenericUSBXHCI.kext just fucks up the entire setup. I have even tried with the one from sourgeforge with no luck.

Also another update: Please make Kernel PM Patch default! And optional: add nv_disable=1 as most of the users have Intel + nVidia laptops.

[cool_recep]

And also, please change the Clover Theme. This one is my suggestion:

http://www.hackintoshosx.com/files/file/4104-yosemite-login-cloverefi-theme/

[artur-pt]

hello

what u are asking is just to do a installer personalized for u .. no way..

remember many users don't use laptops .. clover have several themes in the installer .. that 1 is not..

the generic will see what problems may have...

what we want is to have a generic installer ..

we can post that info in common problems of the installer

good hack

[cool_recep]

hello

what u are asking is just to do a installer personalized for u .. no way..

remember many users don't use laptops .. clover have several themes in the installer .. that 1 is not..

the generic will see what problems may have...

what we want is to have a generic installer ..

we can post that info in common problems of the installer

good hack

 

For some parts yes, for some no.

GenericUSBXHCI.kext is causing problem for everyone. Needs to be removed.

Kernel PM Patch is also required for the most of the users as a lot of people use newer systems.

nv_disable=1 is optional, I agree.

Clover Theme also is optional but the current Theme is the worst theme ever for clover.