Mac OS X 10.8.5 Mountain Lion bootable USB for Intel PCs

[smarw]

yes i did but nothing ...

[Cassio]

You did something wrong. Why would it say "file not found" if the file was there? It makes no sense.

If you run the command with boot instead of boot1h it probably messed up something, file boot is much larger than boot1h.

[smarw]

it's ok i fix it , u re right i did something wrong i copied " boot1he " not "boot1h"

now i get chameleon interface

windows start normaly , i don't need to repair it

but osx didn't start i get a grey screen for 15s and after that a message "press q to continue , press space to view next page"

how to fix it please ?

i tried with verbose -v (in chameleon wizard) but i get into a black screen after the chameleon interface

i tried also "graphicsenabler=no" , it stuck on apple screen and after that a black one +

[smarw]

First, i wanna thank u for ur help

so, osx ML 10.8.2 is installed and win 7 still alive but ...

when i install voodooHDA 2,7,3 (before that i deleted AppleHDA and rebooted) i got a kernel panic ... did u know why , and where i can get a solution for my sound card realtek ALC269 , i still didn't have audio

Also my TouchPad isn't working perfectly, even the keyboard backlight and i can't read the battery

[artur-pt]

hello

for the battery

http://www.osx86.net/downloads.php?do=file&id=1384

try this kext for sound

is a voodoo , i know it work with some alc269 too

http://www.osx86.net/downloads.php?do=file&id=864

good hack

[smarw]

kext for sound is an alc272 and voodoo

should i first delete appleHDA

i am affraid of having a kernel panic !!

[pernacabeluda]

kext for sound is an alc272 and voodoo

Never install 2 kexts with same purpose. This alc272 is probably a patched AppleHDA or VoodooHDA.

 

i am affraid of having a kernel panic

Then you are probably in wrong place, hackintosh is not for you.

[smarw]

u re right ,,,, i am a noob and i spend 10 days to get it work , i had reinstalled 6 times just today

so think u

and perhaps i will try it one day

[pernacabeluda]

Read this

http://Olarila.com/forum/viewtopic.php?f=18&t=454

Apply both solutions to avoid kernel panic before installing the kext.

[pikal]

HELP HELP HELP...

Please see the attached image...

Booting from USB. Tried both Clover and Chameleon. Using already available GUID partition.

Stuck while booting at the below step

ApplePS2Trackpad: ALPS GlldePoint v4.16

Still waiting for root device

Still waiting for root device

Still waiting for root device

Still waiting for root device

Still waiting for root device

...repeatedly displaying the above message.

Laptop configuration: "Dell Inspiron 15R Notebook (Inspiron 5520), Core i5-3210M, 8GB RAM Shared Dual Channel DDR2, 1TB HDD, Intel HD Graphics 4000, Intel Centrino Wireless 2230, 2x2 bgn + Bluetooth"

[pernacabeluda]

Are you booting the installer? Check your BIOS settings, look for USB configurations.

[pikal]

Are you booting the installer? Check your BIOS settings, look for USB configurations.

 

It is booting up via USB. While booting pressing F12 presents boot options menu and I'm selecting USB. I don't see any specific configuration in the BIOS for USB.

[reevil]

Hi!

I'm stuck at:

- Install boot loader to the HD.

ML is installed, I can boot the system using the pendrive (pressing 1 to boot using chameleon and typing the "GraphicsEnabler=No" flag)

I tried to install multishit but it can't be installed, then download chameleon wizard but I don't know how to use it.

Core i5 2500

DH67BL

HD6750

2 x 4 GB DDR3

No internet connection.

[pernacabeluda]

Hi,

follow this post install instructions

http://Olarila.com/forum/viewtopic.php?f=27&t=1716

To install Chameleon you can use this pkg

http://Olarila.com/forum/viewtopic.php?f=9&t=70

[linkin_p]

hi.

im try to install this from chameleon with -v cpus=1 kernel flag and even without it but every time im stuck at following screen.

im used the clover and it did stoped at the beginin of the screen too.

[pernacabeluda]

Hi,

it's a graphics problem, remove video kexts and kernelcache (instructions on first post).

[linkin_p]

Hi,

it's a graphics problem, remove video kexts and kernelcache (instructions on first post).

 

Ive allready done that and deleted all ati kext was that not enough.

Edit: well thanks guys for all helps the problem is if you have a netbook which is have an onborad intel graphic deleting the intel kext is a must and after that i was able to boot with -f kernel flag.

Thanx again the hack is now installing i will post the result.

[hai_kt]

Hi everyone!

I make bootable usb do as first post, install ML and fix some kexts. When I boot into ML with bootable usb (press 1 for Chameleon boot loader), i can login iCloud without error.

I install Chameleon boot loader to HD (same version of bootable usb: Chameleon v2.1 r2109, v2.2svn r2149) and boot to ML without usb, i can't signin iCloud, error "Unable to sign in because of a problem communicating with iCloud".

I tried fix below but don't work:

+ iCloud Fix with EFIStudio: http://cl.ly/2s3Y0K1n0d2g2s222V1P

+ Remove NetworkInterfaces.plist in L/SystemConfigurarion

+ Ethernet BuiltIn = Yes

EthernetBuiltIn

Yes

and also try "PCIRootUID=0 "

+ I can use only model MacBook Pro (8,1) - Core i5/i7 (Sandy Bridge), changing model cause KP on boot.

+ My Ethernet is en0, view in Network Utility, using kets Lnx2Mac Releases new RTL81xx

+ Login fine in Appstore, Facetime, but fail with iCloud.

Can you help me this problem, thanks so much.

[artur-pt]

hello

take a look here and apply the possible solutions

use one of last chameleon

valid serial in smbios

ethernetbuiltin=yes

ethernet in en0

if nothing of this works

insert also in org.chameleon

SystemId

**

Replace the ** with the key generated from http://www.famkruithof.net/uuid/uuidgen

http://Olarila.com/forum/viewtopic.php?f=17&t=1825&p=20482&hilit=icloud#p20482

good hack

[hai_kt]

Hi artur-pt

Thanks for your help, I've just tried your solutions, but don't work.

Any idea for my problem?

Thanks again.

[artur-pt]

hello

sorry , no more ideas

u problem is strange....

all the other services works...

only problem iCloud...

try to create a new account.. apple account, maybe problems with one u are using.

good hack

[hai_kt]

all the other services works...

only problem iCloud...

iCloud, Facetime, Messages don't work.

Appstore, iTunes login fine.

 

try to create a new account.. apple account, maybe problems with one u are using.

Tried with other Apple ID, don't work.

I reinstall ML, don't work (try fixes, reinstall ML.... a lot of times....... without success...)

I dualboot ML and Windows 8 on same MBR HDD.

Thank you and thanks any idea to fix this problem.

[deboopi]

When using this guide I was able to get OS X 10.8.2 on my Sony Vaio VPCSB1X9E (Intel i5 2410, AMD HD 6470 hybrid Intel HD 3000).

If I have read the first pages correctly then this installer is not that much different fro the app you can download from the Apple store.

I had to remove the ATI, Intel HD and nVidia kexts, the kernel cache and the AppleHPET.kext for USB.

Hereafter I could install OS X but the video resolution was fixed at 1024x768 although I needed 1366x768 (I know the best match is 1280x768)

I wanted to start all over again with tonycraps unishit and multishit because they should be easy to fix the resolution problem.

Another problem was that I could only boot from the USB stick, not from the harddisk.

But whatever boot option I tried I could not reinstall with unishit, it always ended in a black screen without even showing the installation screen.

What exactly are the differences between the unishit with the installer app for 10.8.2 and the one in the torrent?

What are possible solutions for the boot problem?

What solution are there for the resolution problem.

Is it possible to set up a unishit manually with the torrent installer?

Can I use tonycraps multishit after the torrent installer ?

I know there are other problems specific for the sony VAiO and I already have some answers but not yet all of them, look here or elsewhere?

[pernacabeluda]

Hello.

Boot from HD

http://Olarila.com/forum/viewtopic.php?f=27&t=1716

Resolution

http://Olarila.com/forum/viewtopic.php?f=18&t=2193

We don't support tonycrap stuff here, you should ask about beast tools in their forum.

[sparky2k]

Hi,

I've been trying to write the image to an SD card and a 8GB Buffalo USB stick. Both produce the following when selecting it as the boot device from BIOS F8 key:

boot0: test

boot0: done

then nothing. I tried setting the partition active that was created from the image on the USB device but no change. Do I need to change any other BIOS settings or try another image writer other than SuSE Studio? It appears to work fine and files appear in HFS+ partition. Do I need boot1h or other files mentioned and copy with transmac from somewhere to the USB stick?

My system: Asus P8Z68 Deluxe/Gen3 Bios 3603; Intel i7-2600K; 16GB RAM; OCZ SSD and standard hard drives; Soundblaster X-Fi Fatal1ty sound card; Nvidia GeForce GTX 570 graphics card.

Edited January 9, 2013 by Guest