X99 Deluxe II on BigSur finally

[Walldemar Serbia]

Today was one of those day that every sincroniza en armonia and that it's that I finally got my XEON E5-2696-V4 w/ X99 Deluxe 2 board install on BIGSUR ver. 11.6.1 w/ OpenCore Bootloader ver 0.7.5 although I have another disk with my CATALINA setup but on that setup its CLOVER w/ the most recent ver. boot loader. Now start to do some tinkering like ask MALDON and when I get my file ready to customize me or better saying to PATCH my DSDT for better performance, with CATALINA I never had my DSDT patch and she was doing on GB-5 Single core 931 Multi- 13543 w/ all c-state on bios enable and no-retention state (ON). So with this setup I expect the same result or at less some improve or consistency on the results, I need to download Intel Gadge to see where my CPU its performing. And like anyone says, "Never ASK ME for my EFI" no all setup works the same. I know it sound rude but that its a saying of the BIG DOGS on most forums so I repeat the same. 

[MaLd0n]

😆

[Walldemar Serbia]

Yes MALDON and thanks you be need but give couple days to enjoin my success my BRAIN esta hirviendo right now I need to install the CPU and IO kexts to see what Intel gadget its reading, One thing I may ask from you to advice me is, I notice that when I went to the EXTENSION in system preference the AppleIntelCPU management and the XCMP both are loaded are these its suppose to work or one or the other, she seem to work beautiful no lag sleep like a baby and it wakes it wake by the keyboard and when it wakes the Q-CODE on the motherboard it reads 30 also after wakes the screen stays off but when I hit any key again it shows the logging screen.

[Walldemar Serbia]

At Maldon aqui esta en Link: https://drive.google.com/file/d/1d1_mdEVT1BwBhgGljeLbXG76ceooNM81/view?usp=sharing

Me avisa para darte acceso. Gracias.

[MaLd0n]

remove ur serials and upload here

https://www.transfernow.net/pt

[Walldemar Serbia]

Ok your asking to open my config file delete the serial # save the file then rerun runme again?

[MaLd0n]

RunMe.app hide it for us

[Walldemar Serbia]

Enviado aqui: https://www.transfernow.net/dl/20211126LboDyGY6/6qLUT3EV

[MaLd0n]

with this efi folder is impossible

very bad folder

[Walldemar Serbia]

What you mean the EFI Folder its very bad, I just download the PAVOs app build the EFI and download the most recent files from the repository then fallows the Dortinas recommendations and success, its not that I was grabbing file from and there, sorry but don't know what you are trying to tell can collaborate more

 

[MaLd0n]

many acpi renames. many sdts

here we don't use this way. we like a clear config based in one good edited dsdt

[Walldemar Serbia]

Well the advice or approach that I may trying to understand from you its that I need to delete al ACPI inputs from the config and get all my SSDT out from my ACPI folder and if the system boot then re- run your send app again

[Walldemar Serbia]

HEY Maldon Im working overtime here but good news I think I boot it with the EFI that I download from your site pretending the X99Broadwell-E and edit your config file with mine but I use a CCC copy of my hard drive and since the EFI partition on that drive was empty I place your EFI edited and waLLA on Desktop right from the get go it seen to be a lit more snappier well let me run the rune app and send to you again so. until then

Well the TURKEY that eaten later help out I hope this file be a success, Oh by the way can you confirm the humble DONATION that I contribute to the site to be in HARMONY with everything, Thanks ones more.

 

https://www.transfernow.net/dl/20211126JnFZcgEn/mMYecr26

[Walldemar Serbia]

HEY MALDON did you received my files and if yes Im not in a hurry just to make sure you can be able now to work w/ the last rune file that send and if you have got the donation, thanks for keeping me inform.

[MaLd0n]

add dsdt, remove ssdt, add dsdt entry, reboot and save one ioreg

DSDT.aml.zip

https://olarila.com/files/Utils/IORegistryExplorer.app.zip

[Walldemar Serbia]

Well she looks good, tomorrow I will test the sleep and the consistency in performance thanks I will let you if I get stuck on something thanks.

X99DX2.zip

[MaLd0n]

test it

DSDT.FULL.zip

[Walldemar Serbia]

I did test its running like it should, but the monitor stays off after wakes and that its with the PIKER argument place on boot arguments I deleted and I'm in the process to see if it works without it, see for me Im not really concern on sleep but performance wise its my concerns, I seen so far same and in occasion better performance than before I will post a video later. Before on the system reference the M.2 pic-e Samsung was show with Apples AHCI driver then now it shows with Generic one it my be a TYPO don't know but performance its the same, I say this cause while testing the performance of the drive before with speed disk results were high on the first test now it takes to leave it running 2 or 3 time to se the results improvements the same goes with the CPU I think it all goes in relation to the POWER MANAGEMNT that all the components are like a hybrid states then when the machine or better yet the application that you use it demands power it kicks in the power, its just that I was kind of us to to see the computer in NITRO most of the TIME now I need to adjust my sell to see how a REAL MAC performs

[Walldemar Serbia]

Malndon good morning at the time of me typing, This time around is to ask you or better yet tell you that I have noticed on system preferences under kext loaded don’t see the XCPM kext so don’t know if it’s good or bad at less she behaves like BigSur with a little less performance 

[MaLd0n]

check ioreg