Jump to content
MaLd0n

Hackintosh macOS Monterey with Clover

Recommended Posts

  • Administrators

Donation with Paypal https://tinyurl.com/r7fchn9

Donation with Binance 0xdbe48ef6b158f1dd0035d7f49555c99e52f72714

Donation with Stripe https://tinyurl.com/2ssnydn6

Donation with BuyMeaCoffee https://tinyurl.com/bvsbpf6e

Donation with BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3

Donation with PicPay @danielnmaldonado

Donation with PiX @danielnmaldonado@gmail.com

Donation with Mercado Livre https://tinyurl.com/y9evkj5u

 

Hackintosh EFI Clover Folders for All Chipsets

https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/

 

Credits: Jief_Machak, Slice and acidanthera team

 

Some words from Slice

 

Since rev5123 devs make joined bootloader Clover+OpenCore. It started as Clover using Clover's GUI and ability to change settings and then started OpenCore to inject and patche kexts and start macOS.

Starting Windows and other OSes is done by Clover's way.

There are new section in config.plist named Quirks that collect setting for OpenCore but some setting is just delegated from Clover because it can change it on the fly.

There is a correspondence of OpenCore and traditional Clover settings to easy migrate from OpenCore to new Clover.

OpenCore                      Clover
AppleCpuPmCfgLock   AppleIntelCPUPM
AppleXcpmCfgLock      KernelPm
DisableRtcChecksum   AppleRTC
LapicKernelPanic          KernelLapic


About kernel and kext patches there is the follow.

1. OC accounts them as same and name "kernel" in the place of name of kext. Clover has different section for Kernel patches, kexts patches and Booter (boot.efi) patches.

2. Clover deal only with 64 bit arch while OC has "Arch" parameter.

Other fields are

OpenCore        Clover
Base                  Procedure
Comment        Comment
Count               Count
Enabled           Disabled
Skip                  Skip
Identifier         Name
Find                  Find
Mask                MaskFind
Replace           Replace
ReplaceMask  MaskReplace
MaxKernel      -
MinKernel       -
-                        MatchOS
-                        InfoPlistPatch
-                        RangeFind

3. Procedure name in OpenCore must be long like __ZN8AppleRTC18setupDateTimeAlarmEPK11RTCDateTime

Clover can use short name. In the example it can be setupDateTimeAlarm.

4. OpenCore assumes byte mask while Clover assumes bit masking. In the case of 0xFF00FF it will be the same. More careful see documentation for OpenCore and samples for Clover at this page.

5. RangeFind restrict search in Clover by several bytes. I don't know if OpenCore is able do the same.

6. Patches in OpenCore can be "Enabled" by setting the variable while in Clover they are enabled by default. User can disable it in the config.plist or in Clover GUI.

7. For Kernel patches we had additional

"StartPattern" and corresponding "MaskStart" to define a place from what we want to search.

OpenCore has no such service. Later we will extend the possibility.

 

 

-Donations-

PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE

Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com

Premium Users HERE - Problems with Paypal HERE

xcd5u2Y.png

Sign up for a Bybit account and claim exclusive rewards HERE

New ways to earn money with Linkvertise HERE

Link to comment
Share on other sites

Hi MaLd0n, finally after 1 days I managed to install Monterey on my Alienware 
laptop, the bootloader is clover, opencore crashes badly, however I have two 
problems, the sound does not work with voodoohda, audio device IDT 92HD73C1 
(HS, Mojave, Catalina works, I don't know in Big Sur) and the second problem 
is the video drivers install them in lybrary / extensions and don't load them 
because they can't load in the kernel cache, can you help me please? Otherwise 
I have no problem, thank you.
L.E. Clover in legacy mode without quircs work ok, with this, crashes.
Link non metal support https://github.com/dortania/PatcherSupportPkg/tree/master/12-Monterey/Extensions/Graphics-Acceleration/AMD-TeraScale

252372042_ScreenShot2021-12-24at21_31_45.thumb.png.760cb1117980e174d587f74412a47f51.png

Edited by ovidoi
  1. My system,  MAC PRO 5.1 - CPU - I3 530 2.92MHz, MB - Intel DH55TC, RAM - 8GB DDR3 pc1600 ELIXIR with Nanya CHIP'S, VIDEO - ASROCK RADEON RX550 PHANTOM 2GB, SSD ADATA SU 630 240GB MOJAVE, SSD - ADATA SU650 120 GB WINDOWS 11 beta, CLOVER 5155, Monterey 12.6.7, Sonoma 14.
  2. Macbook Pro 3.1 2007 Core 2 Duo, Yosemite. SSD Kingstone 128GB
  3. Alienware M17x R3 - MacBook pro 8.3 CPU i7-2760QM 2.2 turbo 3,2 Ghz Ati RadeonHD 6850M 1024GB, 6 GB DDR3 bios A08 uefi unlocked Sata 6Gb High Sierra 10.13.6 ssd KINGSTON SA400S37120G, Catalina 10.15.7. hdd TOSHIBA MQ01ABF050.
Link to comment
Share on other sites

  • Administrators

u need check if this audio codec have support on applealc. if no, u need create one layout for u or use voodoohda

-Donations-

PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE

Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com

Premium Users HERE - Problems with Paypal HERE

xcd5u2Y.png

Sign up for a Bybit account and claim exclusive rewards HERE

New ways to earn money with Linkvertise HERE

Link to comment
Share on other sites

Voodoohda not work in Monterey.

How do i install kext in S/L/E, in L/E not make kext cache, i try opencore patcher for install audio and video AMD 6850M but tell me to disable AMFI, how to do? I put in boot args amfi_get_out_of_my_way=1 but cannot patch.

  1. My system,  MAC PRO 5.1 - CPU - I3 530 2.92MHz, MB - Intel DH55TC, RAM - 8GB DDR3 pc1600 ELIXIR with Nanya CHIP'S, VIDEO - ASROCK RADEON RX550 PHANTOM 2GB, SSD ADATA SU 630 240GB MOJAVE, SSD - ADATA SU650 120 GB WINDOWS 11 beta, CLOVER 5155, Monterey 12.6.7, Sonoma 14.
  2. Macbook Pro 3.1 2007 Core 2 Duo, Yosemite. SSD Kingstone 128GB
  3. Alienware M17x R3 - MacBook pro 8.3 CPU i7-2760QM 2.2 turbo 3,2 Ghz Ati RadeonHD 6850M 1024GB, 6 GB DDR3 bios A08 uefi unlocked Sata 6Gb High Sierra 10.13.6 ssd KINGSTON SA400S37120G, Catalina 10.15.7. hdd TOSHIBA MQ01ABF050.
Link to comment
Share on other sites

Hello, i'm verry happy, today i download the last opencore legacy patcher tui app and i used to patch Catalina 10.15.7 for acceleration gpu Terrascale2 and is work very well, now i have QE/CI for AMD HD6850M. I tested with Uningine Valley, now i have transparency and blurr desktop and work screensaver and 3D app, yooohooo. I think to work on Monterey but not have time to test yet and not work sound.

  1. My system,  MAC PRO 5.1 - CPU - I3 530 2.92MHz, MB - Intel DH55TC, RAM - 8GB DDR3 pc1600 ELIXIR with Nanya CHIP'S, VIDEO - ASROCK RADEON RX550 PHANTOM 2GB, SSD ADATA SU 630 240GB MOJAVE, SSD - ADATA SU650 120 GB WINDOWS 11 beta, CLOVER 5155, Monterey 12.6.7, Sonoma 14.
  2. Macbook Pro 3.1 2007 Core 2 Duo, Yosemite. SSD Kingstone 128GB
  3. Alienware M17x R3 - MacBook pro 8.3 CPU i7-2760QM 2.2 turbo 3,2 Ghz Ati RadeonHD 6850M 1024GB, 6 GB DDR3 bios A08 uefi unlocked Sata 6Gb High Sierra 10.13.6 ssd KINGSTON SA400S37120G, Catalina 10.15.7. hdd TOSHIBA MQ01ABF050.
Link to comment
Share on other sites

Hi MaLd0n , after a while I tried to reinstall Mac os Monterey 12.3.1 
and I encountered the same problem as in post 1.
The 12.2 install and work but i need the support and erase them.
I used clover efi from the Olarila site but this time not work, 
but I couldn't complete the installation until the end, same error. 
Each time I repeat the same installation error, "An error occured applayng this 
software update" I used the latest version of the clover bootloader, 
Catalina working with no issue. I used smbios 11.4 to 16.1. 
Opencore does't work for me although it has uefi boot, uefi clover works.

Catalina instaled with smbios MBP11.4 and boot and work with MBP 8.3.

Somebody fix this error? thank you in advance.

Edited by ovidoi
  1. My system,  MAC PRO 5.1 - CPU - I3 530 2.92MHz, MB - Intel DH55TC, RAM - 8GB DDR3 pc1600 ELIXIR with Nanya CHIP'S, VIDEO - ASROCK RADEON RX550 PHANTOM 2GB, SSD ADATA SU 630 240GB MOJAVE, SSD - ADATA SU650 120 GB WINDOWS 11 beta, CLOVER 5155, Monterey 12.6.7, Sonoma 14.
  2. Macbook Pro 3.1 2007 Core 2 Duo, Yosemite. SSD Kingstone 128GB
  3. Alienware M17x R3 - MacBook pro 8.3 CPU i7-2760QM 2.2 turbo 3,2 Ghz Ati RadeonHD 6850M 1024GB, 6 GB DDR3 bios A08 uefi unlocked Sata 6Gb High Sierra 10.13.6 ssd KINGSTON SA400S37120G, Catalina 10.15.7. hdd TOSHIBA MQ01ABF050.
Link to comment
Share on other sites

  • Administrators

update all(kexts, bootloader) and try again

-Donations-

PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE

Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com

Premium Users HERE - Problems with Paypal HERE

xcd5u2Y.png

Sign up for a Bybit account and claim exclusive rewards HERE

New ways to earn money with Linkvertise HERE

Link to comment
Share on other sites

Ok, thank you, i try.

  1. My system,  MAC PRO 5.1 - CPU - I3 530 2.92MHz, MB - Intel DH55TC, RAM - 8GB DDR3 pc1600 ELIXIR with Nanya CHIP'S, VIDEO - ASROCK RADEON RX550 PHANTOM 2GB, SSD ADATA SU 630 240GB MOJAVE, SSD - ADATA SU650 120 GB WINDOWS 11 beta, CLOVER 5155, Monterey 12.6.7, Sonoma 14.
  2. Macbook Pro 3.1 2007 Core 2 Duo, Yosemite. SSD Kingstone 128GB
  3. Alienware M17x R3 - MacBook pro 8.3 CPU i7-2760QM 2.2 turbo 3,2 Ghz Ati RadeonHD 6850M 1024GB, 6 GB DDR3 bios A08 uefi unlocked Sata 6Gb High Sierra 10.13.6 ssd KINGSTON SA400S37120G, Catalina 10.15.7. hdd TOSHIBA MQ01ABF050.
Link to comment
Share on other sites

On 4/24/2022 at 3:33 PM, MaLd0n said:

update all(kexts, bootloader) and try again

Hi, no luck, same issue, update kext and use again your efi for sandy bridge, i wait another update, thx.

  1. My system,  MAC PRO 5.1 - CPU - I3 530 2.92MHz, MB - Intel DH55TC, RAM - 8GB DDR3 pc1600 ELIXIR with Nanya CHIP'S, VIDEO - ASROCK RADEON RX550 PHANTOM 2GB, SSD ADATA SU 630 240GB MOJAVE, SSD - ADATA SU650 120 GB WINDOWS 11 beta, CLOVER 5155, Monterey 12.6.7, Sonoma 14.
  2. Macbook Pro 3.1 2007 Core 2 Duo, Yosemite. SSD Kingstone 128GB
  3. Alienware M17x R3 - MacBook pro 8.3 CPU i7-2760QM 2.2 turbo 3,2 Ghz Ati RadeonHD 6850M 1024GB, 6 GB DDR3 bios A08 uefi unlocked Sata 6Gb High Sierra 10.13.6 ssd KINGSTON SA400S37120G, Catalina 10.15.7. hdd TOSHIBA MQ01ABF050.
Link to comment
Share on other sites

Hi Maldon, i fix this issue to redownload olarila installer and efi clover for sandy bridge notebook, instal with smbios macbook pro 14.1 and after all stage of install boot with smbios macbook pro 8.3 and voilla Monterey 12.1 and upgrade 12.3.1, but sound for idt not work, i  working for that, and must patched video card AMD Radeon 6870m, for Catalina work greate. Thank you.

Edited by ovidoi
  1. My system,  MAC PRO 5.1 - CPU - I3 530 2.92MHz, MB - Intel DH55TC, RAM - 8GB DDR3 pc1600 ELIXIR with Nanya CHIP'S, VIDEO - ASROCK RADEON RX550 PHANTOM 2GB, SSD ADATA SU 630 240GB MOJAVE, SSD - ADATA SU650 120 GB WINDOWS 11 beta, CLOVER 5155, Monterey 12.6.7, Sonoma 14.
  2. Macbook Pro 3.1 2007 Core 2 Duo, Yosemite. SSD Kingstone 128GB
  3. Alienware M17x R3 - MacBook pro 8.3 CPU i7-2760QM 2.2 turbo 3,2 Ghz Ati RadeonHD 6850M 1024GB, 6 GB DDR3 bios A08 uefi unlocked Sata 6Gb High Sierra 10.13.6 ssd KINGSTON SA400S37120G, Catalina 10.15.7. hdd TOSHIBA MQ01ABF050.
Link to comment
Share on other sites

 

Hi, everyone, I installed monterey on a nuc10i7fnb. During start and operation it freezes. I couldn't install Olarila image, but I loaded and installed the image from Apple's website. do you have a stable nuc10 open core or clover efi for the nuc10 monterey? Thanks !!!

Link to comment
Share on other sites

  • Administrators

U can use opencore or clover. both is good

  • Thanks 1

-Donations-

PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE

Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com

Premium Users HERE - Problems with Paypal HERE

xcd5u2Y.png

Sign up for a Bybit account and claim exclusive rewards HERE

New ways to earn money with Linkvertise HERE

Link to comment
Share on other sites

  • Administrators
6 hours ago, The HeadHunters said:

Dsdt patch required after updating from Big Sur to Monterey?

dsdt patch is required for all system and situations but u can use ssdt olarila too and stay in a basic mode. work good

-Donations-

PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE

Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com

Premium Users HERE - Problems with Paypal HERE

xcd5u2Y.png

Sign up for a Bybit account and claim exclusive rewards HERE

New ways to earn money with Linkvertise HERE

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.





×
  • Create New...