Intel HD 3000 hackintosh

[artur-pt]

If you installed Lion or Mountain Lion on your laptop with Intel HD 3000 and stop at first boot, use this procedure to reach the graphical environment.

 

Do boot -s (single user) and run these commands

fsck -fy
mount -uw /
mkdir /intelhd_backup
cd /System/Library/Extensions
mv AppleIntelHD* AppleIntelSNB* /intelhd_backup
reboot

 

 

Config SMBIOS MacBookPro8,1 http://Olarila.com/forum/viewtopic.php?f=2&t=1302

 

 

For resolutions greater than 1366x768 it's usually necessary to inject property DualLink in the display device, which can be done with this DSDT patch

into device name_adr [b]0x00020000[/b] insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
   Store (Package (0x02)\n
       {\n
           "AAPL00,DualLink",\n
           Buffer (0x04)\n
           {\n
               0x01, 0x00, 0x00, 0x00\n
           }\n
       }, Local0)\n
   DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n
   Return (Local0)\n
}
end

 

If you don't have any patch in dsdt, apply also DTGP

 

How to apply the patches http://Olarila.com/forum/viewtopic.php?f=19&t=634

 

DualLink can be also injected by device-properties ("EFI string")

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
       <key>PciRoot(0x0)/Pci([b]0x2,0x0[/b])</key>
       <dict>
               <key>AAPL00,DualLink</key>
               <string>0x00000001</string>
       </dict>
</dict>
</plist>

 

Convert xml to hex using gfxutil

gfxutil -i xml -o hex device-properties.plist device-properties.hex

 

and insert hex string in org.chameleon.Boot.plist key device-properties

   <key>device-properties</key>
  <string>[hexadecimal EFI string]</string>

 

 

DualLInk File download

 

http://Olarila.com/forum/download/file.php?id=1989

 

When you're done, install again the backup kext.

 

In Lion to work must be in minimum 10.7.3.

[ler0ck]

Hello, it's still me . I installed OS X ML without any dsdt, it worked except there are green lines with intel HD 3000.

So, if I well understood, I have to inject Dualink by device-properties isn't it ?

[artur-pt]

hello

only if u resolution is bigger 1366x768

good hack

[ler0ck]

Thanks a lot, it works!

[leont3557]

I know now,thank you!

[noel_gallagehr]

Hello!

I've a laptop with the Intel HD 3000 on I3-2350m.

I've moved the graphic kexts and config the SMBIOS with MacbookPro 8,1 (and 8,2 and 8,3) also I patch the DSDT but the graphics doesn't work well.

I've only one resoluction and QE/CI doesn't work. Anyone can help me?

ps. sorry for me poor english.

[artur-pt]

Hello

try to test smbios macmini5,1

good hack

[drag0nman]

Hello everybody,

I have ASUS N53SM with ML 10.8.2 with Intel HD 3000,

and when the system loading before the screen of login, the screen is totally black.

I don't have resolutions greater than 1366x768.

I have installed:

INTEL

- AppleIntelHD3000Graphics.kext

- AppleIntelHD3000GraphicsGA.plugin

- AppleIntelHD3000GraphicsGLDriver.bundle

- AppleIntelHD3000GraphicsVADriver.bundle

- AppleIntelIVBVA.bundle

- AppleIntelSNBGraphicsFB.kext

- AppleIntelSNBVA.bundle

- AppleIntelFramebufferCapri.kext

and after any tests the problem is AppleIntelSNBGraphicsFB.kext.

I have used smbios MacBook Pro 8.2.

Any suggests?

Thank you

[pernacabeluda]

What's your screen resolution? If it's 1366x768 you may try to inject the DualLink property.

[drag0nman]

What's your screen resolution? If it's 1366x768 you may try to inject the DualLink property.

 

I have just tried but I got the same result: blackscreen.

I have created a xml file with Property List Editor the plist file:

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
       <key>PciRoot(0x0)/Pci(0x2,0x0)</key>
       <dict>
               <key>AAPL00,DualLink</key>
               <string>0x00000001</string>
       </dict>
</dict>
</plist>

 

after I have used gfutil for creating the.hex file.

I have moved "device-properties.hex" to "/Extra" directory and I have added

 

 <key>device-properties</key>
  <string>[hexadecimal EFI string]</string>

 

in org.chameleon.Boot.plist .

Something wrong?

[pernacabeluda]

You don't have to write [hexadecimal EFI string] in Boot.plist, instead you should paste the string from the hex file.

[drag0nman]

You don't have to write [hexadecimal EFI string] in Boot.plist, instead you should paste the string from the hex file.

 

ah ok!

Tnx... do u mean all content?

5600000001000000010000004a0000000100000002010c00d041030a000000000101060000027fff0400240000004100410050004c00300030002c004400750061006c004c0069006e006b0000000800000001000000

?!?

[pernacabeluda]

Yes, it will be

<key>device-properties</key>
<string>5600000001000000010000004a0000000100000002010c00d041030a000000000101060000027fff0400240000004100410050004c00300030002c004400750061006c004c0069006e006b0000000800000001000000</string>

[drag0nman]

This is my org.chameleon.Boot.plist file:

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Boot Graphics</key>
<string>No</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>ForceHPET</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>Graphics Mode</key>
<string>1920x1080x32</string>
<key>InstantMenu</key>
<string>0</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Quiet Boot</key>
<string>No</string>
<key>Rescan</key>
<string>No</string>
<key>SMBIOS</key>
<string>/Extra/smbios.plist</string>
<key>SystemType</key>
<string>2</string>
<key>Theme</key>
<string>iHack</string>
<key>device-properties</key>
<string>5600000001000000010000004a0000000100000002010c00d041030a000000000101060000027fff0400240000004100410050004c00300030002c004400750061006c004c0069006e006b0000000800000001000000</string>
</dict>
</plist>

 

I'm trying it!

[drag0nman]

Nothing

I get always blackscreen when I install AppleIntelSNBGraphicsFB.kext

[Davidb8]

so do i apply dual link patch AND DTGP patch

and then do the hex injection?? or just apply the patches?!

[pernacabeluda]

Apply the DSDT patches OR use the hex string, don't do both things.

[hroen_al]

please help to fix it,.

line 8615 Name (_HID, "ABCDEFGH")

[artur-pt]

hello

change it by PNP0C15

good hack

[hroen_al]

hello

change it by PNP0C15

good hack

 

sorry,.

my screen still 1024x768,.

I cant fix it,.

I cant install bootloader too

I must boot from flashdrive to use OSX and windows 7 on the harddrive on my laptop

Toshiba L740

Core I3

3GB ram

Intel HD3000

[artur-pt]

hello

if u use all the options in the guide about hd 3000

no solution for u problem

about the boot.. what have u donne ?

good hack

[hroen_al]

1st I've install chameleon bootloader with chameleon wizard, like this picture

here the setting on chameleon wizard

but, when I boot from harddrive, the bootloader not appear,.

windows 7 start if I boot from harddrive

and then I've install chameleon like this

but, when I boot from harddrive, the bootloader not appear,.

just black screen and "boot0 : test" and "boot0 : error"

whats wrong???

sorry for my english,.

[pernacabeluda]

Try this

http://Olarila.com/forum/viewtopic.php?f=27&t=1676

[hroen_al]

Try this

http://Olarila.com/forum/viewtopic.php?f=27&t=1676

 

thanks man,.

but, how to fix the bootloader??

when I turn on my laptop, the OSX appear without bootloader,.

maybe there's something wrong when installing chameleon???

[pernacabeluda]

Check the org.chameleon.Boot tab in Chameleon Wizard. You can't have quiet boot. Set a timeout or instant menu.