Hackintosh Olarila HackBeast ProArt Z490 CREATOR 10G with Thunderbolt - Full DSDT patches - Clover or OpenCore - Guide and Discussion

[snoupy]

On 5/5/2021 at 1:01 AM, MaLd0n said:

DSDT.aml.zip 58.67 kB · 1 download

use power button to wake

Did not make the trick... Still searching for a patch, I found today that thunderbolt causes crash. Disabling TB in bios works for sleep/wake correctly. 

[MaLd0n]

remove ssdt tbh3 and check if work

[snoupy]

13 hours ago, MaLd0n said:

remove ssdt tbh3 and check if work

Worked without TBH3

Working now on display freeze on RX570 it seems happening when system use HW acceleration

Here is my actual EFI

EFI.zip

42 minutes ago, snoupy said:

Worked without TBH3

Working now on display freeze on RX570 it seems happening when system use HW acceleration

Here is my actual EFI

EFI.zip 3.89 MB · 0 downloads

Here is a kernel log about GPU Resetting 

Kernel_2021-05-07-092316_iMac-de-Thierry.gpuRestart.zip

[MaLd0n]

is not a common problem

u disable hibernate, etc with olarila repair app?

[snoupy]

On 5/8/2021 at 1:29 AM, MaLd0n said:

is not a common problem

u disable hibernate, etc with olarila repair app?

Yes done.

Happens easy when opening App Store in full screen, or playing a video.

Still searching...

[StanTheMan]

On 3/19/2021 at 10:28 AM, MaLd0n said:

Donation with Paypal https://tinyurl.com/r7fchn9

Donation with BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3

Donation with ETH 0x255EdE75081D2731FcD6F7BE171dfC7f5ce9DF05

Donation with LTC MTmkEY9xiLkuzf4vHtRYHLoapBcmmoApFc

Donation with DAI 0x255EdE75081D2731FcD6F7BE171dfC7f5ce9DF05

Donation with USDC 0x255EdE75081D2731FcD6F7BE171dfC7f5ce9DF05

Donation with PicPay @danielnmaldonado

Donation with PiX @danielnmaldonado@gmail.com

Donation with Mercado Livre https://tinyurl.com/y9evkj5u

 

A very custom DSDT for best experience under macOS. Removed all unused devices, injected all Apple devices, essentials, cosmetics, real improvements. 

 

- Useful Links -
https://tinyurl.com/43t5m6d4

 

-OpenCore Vanilla TUTORIAL-

 

 

-USB Port Mapping TUTORIAL-

 

 

-Bios/UEFI Settings-

Serial Port = Disable

CFG Lock = Disable

-Thunderbolt Configuration-

Security Level - No Security

GPIO3 Force Pwr - Enabled

 

-Hardware-

Mobo - Asus ProArt Z490 CREATOR 10G

Processor - i9 10th Intel

GPU - RX 580, 590, VEGA 56, VEGA64, 5600XT, 5700XT or RADEON VII

Cooler - CoolerMaster Masterliquid ML360R RGB

NVME - Corsair MP600

 

-EFI folders- 

-EFI OpenCore Folder

https://tinyurl.com/y7puzwv9

-EFI Clover Folder

https://tinyurl.com/ycr9g9ye

 

Paste EFI folder into EFI partition, reboot and extract one SendMe. Post this dump here for full ACPI solution!

Download RunMe.app dumper

 

-DSDT Patches-

 

-Screenshots-

-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!

 

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!

We're all here to have fun and learn from each other!

Dude, you rock! I love this place and all I am reading!

I have the same setup as you with the ProArt Mobo. The only differences are my 10900k cpu and my old but good 1080ti (which will not work in Catalina).... I am really hoping to use iGpu acceleration on 10.15.5, but am getting a black screen on boot up (exactly when verbose is complete and the apple logo should show up. It seems a frame buffer issue.... Do you have any advice? Much gratitude!

[snoupy]

On 5/13/2021 at 4:38 PM, StanTheMan said:

Dude, you rock! I love this place and all I am reading!

I have the same setup as you with the ProArt Mobo. The only differences are my 10900k cpu and my old but good 1080ti (which will not work in Catalina).... I am really hoping to use iGpu acceleration on 10.15.5, but am getting a black screen on boot up (exactly when verbose is complete and the apple logo should show up. It seems a frame buffer issue.... Do you have any advice? Much gratitude!

Are you connected on the 1080Ti or internal ? Did you try with boot arg agdpmod=pikera ?

I switched to a Sapphire Radeon RX 570 and my 4K through HDMI work so far.

My boot args: alcid=1 shikigva=0 watchdog=0 -no_compat_check (shikigva=0 may not be useful ?)

[gemep]

Hey man, great guide 
here's my dump, thank you for your help!

https://we.tl/t-3zxn6NOcJB

i mapped my USB ports but I have this problem - if I connect a USB key works fine, if I connect something that needs more power like an external audio card the device doesn't power up for some reason

 

[MaLd0n]

On 5/17/2021 at 3:29 AM, snoupy said:

(shikigva=0 may not be useful ?)

with amd cards u can use with shikigva=128 or remove this flag

9 hours ago, gemep said:

Hey man, great guide

Archive.zip

[gemep]

On 5/20/2021 at 1:22 AM, MaLd0n said:

with amd cards u can use with shikigva=128 or remove this flag

Archive.zip 62.12 kB · 7 downloads

Thank you so much for the DSDT.  i have some questions if you don't mind:

• can i  get rid fo the other SSDTS in the ACPI folder?
• will the DSDT break if i change smbios? i'm considering to switch to iMac20,2 to use quicksync with my i9

one last multiboot-related question:

• opencore sanity checker says to turn ACPI > quirks > RebaseRegions to OFF for comet lake cpus.
  I have windows 10 installed on another disk, and boot fails unless i keep RebaseRegions ON.
  Any idea what can be causing this? Windows boots ok if i launch it directly from bios without opencore.

 

thank you for your time!

 

[MaLd0n]

https://www.olarila.com/topic/13019-guide-dual-boot-with-opencore-with-full-acpi-and-real-vanilla-solution/

[Edkroket]

On 5/17/2021 at 8:29 AM, snoupy said:

Are you connected on the 1080Ti or internal ? Did you try with boot arg agdpmod=pikera ?

I switched to a Sapphire Radeon RX 570 and my 4K through HDMI work so far.

My boot args: alcid=1 shikigva=0 watchdog=0 -no_compat_check (shikigva=0 may not be useful ?)

Did you manage to get your system running without crashes?
I have same board, 10900 CPU and a Radeon VII and 128 GB RAM. My problem is after 3 hours of REMBER test my system gets KP? I already changed RAM and used different EFI folders but can't get it stable.

If your system runs fine would you mind sharing your EFI?

 

Thanks.

[snoupy]

On 5/26/2021 at 5:39 PM, Edkroket said:

Did you manage to get your system running without crashes?
I have same board, 10900 CPU and a Radeon VII and 128 GB RAM. My problem is after 3 hours of REMBER test my system gets KP? I already changed RAM and used different EFI folders but can't get it stable.

If your system runs fine would you mind sharing your EFI?

 

Thanks.

Hi Edkroket,

My system is stable since two weeks for basic use. I didn't do heavy work.

Here is my EFI. Just removed BID and serials.

Hope it will help, good luck !

EFI.snoupy.zip

[fgalan]

Ola Maldon,

 

I was using your EFI files, and the system boots in to installer for Catalina, no lucky for Big Sur. I installed Catalina but, built in ethernet does not work.

Setup:

Asus ProArt 10G

i9 10900K unlocked con CFG unlock needed, as far I know

XFX RX 580 8GB

SAMSUNG 840 EVO 120GB SSD

The system installed properly, and in the final installation stage if I check “connect to internet” the installer crashes. I finally check “No connect to internet” and the installer finished properly, but the ethernet as expected dors not work. I used the CLOVER EFI, could be different with OC?

 

Regards

Fran

[MaLd0n]

xfx is not good

with my folder u just need go to installer

i think this crash is ab out xfx

[fgalan]

Graphics works ok, in fact the card is recognized in the system properties. What about the ethernet is not recognized? Due to graphics?

[MaLd0n]

this ethernet need a patch

[fgalan]

Hello Maldon,

 

Sorry but with your EFI folder the ethernet should work isn’t it? I installed Catalina with your EFI folder with no problems, but the built in ethernet still not detected... what patch you mean? Sorry for deal you, I am pretty new with hackintosh. Let me know what I need to do. Ethernet seems to be the only thing does not work.

 

Regards

 

Fran

[MaLd0n]

u need a fine tune

EFI folder is a first step

[fgalan]

Attached a RunMe Dump

Thanks

Send me Frans-Mac-Pro.zip

[joeymok]

Is there any way to install it on Mojave OS?
It works fine on catalina OS.
It won't even boot in Mojave.

[MaLd0n]

13 hours ago, joeymok said:

It won't even boot in Mojave.

use catalina+

[fgalan]

Hello

 

Successfully installed Catalina on this MoBo with the Maldon Help, but still two questions.

How can I enable VT-x and Vt-d virtualization? I would to run some virtual machines with VMWare Fusion and also run docker if it is possible. I enabled Vt-d in the BIOS but no changes in the results.  May something to change in the ACPI.

Second question is about to update to Big Sur, I am unable to boot in to the installer or upgrade from Catalina itself. In the last case the installer runs success but unable to boot anymore. Somebody installed Big Sur as far I had seen, could you share your EFI?

 

Regards

 

Fran

[MaLd0n]

disable quirk DisableIoMapper

post ur efi folder here

[fgalan]

42 minutes ago, MaLd0n said:

disable quirk DisableIoMapper

post ur efi folder here

EFI folder attached. DisableIOMapper quirk disabled.... I hope. Still not working.

Thanks Maldon

EFI.zip