Hackintosh Olarila HackBeast ProArt Z490 CREATOR 10G with Thunderbolt - Full DSDT patches - Clover or OpenCore - Guide and Discussion

[Samuel84]

14 hours ago, MaLd0n said:

no. don't change nothing. imac20 dont generate hardware accel

use full efi folder and remap ur usb

https://www.transfernow.net/dl/202112146EGFR7pf

Thanks. What Hardware Acceleration? Primary GPU (RX580) HW Acceleration? I saw for Z490 Vision D you used iMac 20.x. Why its applicable there? Any other Issues with iMac 20.x? I already have lots of software and things prepared and authorized for iMac 20.x. Thats why i'm asking. If its only HW GPU Acceleration i could live without.

USB port map with Hackintool i know how to do. I did before. BTW nice music in the background of those vids:)...

Best Regards

Samuel

Edited December 14, 2021 by Samuel84

[MaLd0n]

U can use iMac20 but need enable IGPU for Intel Quick Sync

[Samuel84]

33 minutes ago, MaLd0n said:

U can use iMac20 but need enable IGPU for Intel Quick Sync

I know how to do it. No problem.

thanks mate. Thunderbolt working good. My Audio Interface runs. Sent you 20bugs.

[MaLd0n]

Enjoy!

[Samuel84]

3 hours ago, MaLd0n said:

Enjoy!

Thanks. I guess final issue: Ethernet doesnt work. Tried to fix via Device Properties but couldnt resolve.

LAN is on in bios.

Rest looks good.

https://www57.zippyshare.com/v/rDG6ypHK/file.html

Screenshot 2021-12-14 at 23.33.11.zip

Screenshot 2021-12-14 at 23.35.19.zip

Edited December 14, 2021 by Samuel84

[MaLd0n]

intel 2.5g in some cases dont work good

[Samuel84]

8 hours ago, MaLd0n said:

intel 2.5g in some cases dont work good

I found a way it works and after resetting with
sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist it was correct in EN0. You need to include two FakePCIDKext and add some device properties. I attached you the files and the screenshots for future build requests from others.

https://www119.zippyshare.com/v/x7J8c4cg/file.html

Edited December 15, 2021 by Samuel84

[MaLd0n]

2 hours ago, Samuel84 said:

FakePCIDKext

dont use these kexts. cause some kps

[Samuel84]

4 hours ago, MaLd0n said:

dont use these kexts. cause some kps

Ok, thanks. But how then i should get ethernet to work?

I tried with your EFI to add a Kernel Patch and a device propertie according Dortania Comet Lake Guide. But no luck.

Please see my EFI

https://www25.zippyshare.com/v/gAu5DPpR/file.html

i checked your initial build overview. There is indicated on the pictures that you have Intel210 and not 225. did you use other PCI Ethernet Card?

Edited December 15, 2021 by Samuel84

[fgalan]

Finally I had success installed Monterey and updated to 12.1 right now.... from a fresh install as suggested by Maldon

I had used the Clover300-400 EFI file and it boots. Copied EFI folder to the EFI partition and run runmeapp. I attached the dump. USB seems not to work, and the Graphics card Radeon RX580 seems not to work too.

Please could you have a look in to my dump? please enable the virtualization in the ACPI to use VMWare as in Catalina.

 

Thanks Maldon, Already sent a coffee to you...

Send me Mac-Pro-de-Fran.zip

Edited December 15, 2021 by fgalan

[MaLd0n]

Archive.zip

disable IGPU on bios or use -wegnoigpu

[Samuel84]

On 12/15/2021 at 2:11 AM, MaLd0n said:

intel 2.5g in some cases dont work good

I put in a ASUS XG-C100C 10G in this should work out of the box as it has Aquantia Chip which is natively supported. The system doesnt boot anymore with the DSDT.aml in EFI and either without DSDT.aml from USB Stick. 
 

https://www31.zippyshare.com/v/s3P7KBcX/file.html

Plese help!

[MaLd0n]

upload here

zippy share fail many times

https://www.transfernow.net/pt

[Samuel84]

23 hours ago, MaLd0n said:

upload here

zippy share fail many times

https://www.transfernow.net/pt

The following happend: yesterday i built in the ASUS XG-C100C 10G. After that i could boot with EFI with DSDT.aml. The Asus Ethernet was recognised out of the box but in EN2. Besides that i have a Fenvie Wifi Bluetooth Card in the system. Then i sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist to reset Networkadapter to get EN0 for Ethernet. After reboot i cant boot anymore. I took out both Cards Fenvie and Asus Ethernet and tried to boot with USB Stick witz only ssdt olarilla in it. I tried to disable all Ethernet Kext and boot without, no help. Please see image attached

https://www.transfernow.net/dl/20211217xErBfQnZ

[MaLd0n]

cache problem

[Samuel84]

1 hour ago, MaLd0n said:

cache problem

How to solve that?

[Samuel84]

On 12/17/2021 at 5:40 PM, Samuel84 said:

How to solve that?

Any Idea about that? What could i try? thanks for any idea.

[Samuel84]

I‘m with you i guess its a kextcache problem. But how could i fix it. My backups are 4month old. So i would rather like to fix it somehow if there is a way…

[Samuel84]

So, i just overinstalled on the existing system and it boots again. I did built in the Acquantia Card again with a kernel patch which is needed according other sources. But right now Thunderbolt isnt working anymore. Thunderbolt has worked before.

I ran runme again with the DSDT.AML in the EFI. Could you please check Thunderbolt config. If that doesnt work to check Thunderbolt with DSDT.AML in it i could run it again with only Olarilla.SSDT

Please find attached the files

https://www.transfernow.net/dl/20211225xYwcJiby/pdFFDkLZ

Edited December 25, 2021 by Samuel84

[MaLd0n]

thunderbolt is just bios/uefi config and ssdt for hotplug

[Samuel84]

On 12/25/2021 at 7:29 PM, MaLd0n said:

thunderbolt is just bios/uefi config and ssdt for hotplug

My fault, in nevoursness i forgot to enable thunderbolt. So right now everything is good and running. I would recommend to use seperate ethernet card for correct usage.

[cachiputi]

Hi @MaLd0n

I have a problem with the virtualization programs.
I guess it's because my cofig is missing an OpenCore library or something.
Neither Parallels, nor VB, nor VW ... all when trying to start Windows 10 give me an error.
You can help?

Thank you.

[Samoy D.]

On 4/6/2021 at 3:43 PM, cachiputi said:

Hi @MaLd0n

Have you been able to find out if the 1Gb pcie ethernet card can be used in Hackintosh?

Thank you.

the 10gb Lan card works fine ... just plug it  on x8 pcie then patch ..

com.apple.driver.AppleEthernetAquantiaAqtion

AQC 107 10 GbE v2

0F84C002 0000

c0F84C002 0000

 

Screen Shot 2022-01-30 at 1.44.46 AM.zip

On 12/15/2021 at 1:33 AM, Samuel84 said:

Thanks. I guess final issue: Ethernet doesnt work. Tried to fix via Device Properties but couldnt resolve.

LAN is on in bios.

Rest looks good.

https://www57.zippyshare.com/v/rDG6ypHK/file.html

Screenshot 2021-12-14 at 23.33.11.zip 27.19 kB · 0 downloads

Screenshot 2021-12-14 at 23.35.19.zip 189.07 kB · 0 downloads

Just Use my EFI... every issues are fixed.... all works fine... thunderbolt, 10g lan , 2.5g ethernet, sleep/wake, airdrop, bluetooth, etc.. Audio glitch fixed also

Opencore 0.7.7

Download : https://drive.google.com/file/d/19Bu6sxMmFqfwL_DHvL4DHywQD7vPfxBB/view?usp=sharing

[cachiputi]

On 1/29/2022 at 11:45 PM, Samoy D. said:

the 10gb Lan card works fine ... just plug it  on x8 pcie then patch ..

com.apple.driver.AppleEthernetAquantiaAqtion

AQC 107 10 GbE v2

0F84C002 0000

c0F84C002 0000

 

Screen Shot 2022-01-30 at 1.44.46 AM.zip 179.77 kB · 0 downloads

Just Use my EFI... every issues are fixed.... all works fine... thunderbolt, 10g lan , 2.5g ethernet, sleep/wake, airdrop, bluetooth, etc.. Audio glitch fixed also

Opencore 0.7.7

Download : https://drive.google.com/file/d/19Bu6sxMmFqfwL_DHvL4DHywQD7vPfxBB/view?usp=sharing

Thanks.

[fgalan]

Hello guys,

 

I was updating without major issues from 12.1 to 12.2 but with 12.3.1 seems something wrong. After a few seconds the mouse and the keyboard freezes and cannot do nothing except hard reset. Did you experienced something like this?