Post install video issues

[Cassio]

If you had to remove video kexts to be able to boot ML installer (or used HackBoot with disabler) you will probably need to do the same in the installed system. This time don't remove the kexts, just move them to a backup folder, as you will want to re-install them later. Some kexts need patching and proper system configuration to work, for example ATI, Intel, nVidia.

Boot with -s (single user) and run

fsck -fy
mount -uw /
mkdir /kext_backup
cd /System/Library/Extensions
mv AppleIntelHD* AppleIntelSNB* AppleIntelFramebuffer* AMDRadeon* ATI* GeForce* NVDA* /kext_backup
rm ../Caches/com.apple.kext.caches/Startup/kernelcache
reboot

ATI = AMDRadeon* ATI*

Intel = AppleIntelHD* AppleIntelSNB* AppleIntelFramebuffer*

nVidia = GeForce* NVDA*

[jdmcelica]

Props to you, thank you! fixed my issue being stuck at the TUFS message

[jdmcelica]

I'm having a hard time getting my video card recognized/installed without freezing at the boot.

What do I do after I am able to boot into my OSX Mountain Lion for the first time?

Do I put the kexts back into S/L/E?

Then i ran multishit to patch everything, then boom, stuck at boot screen while loading

NTFS..

NTFS..

I have GeForce 520GT

[Cassio]

Insert your card's ID into NVDAResman and NVDAGF100Hal, enable GraphicsEnabler then re-install kexts. See nVidia link on first post for details.

[fc bayern]

Cassio

What about wake problems with some video card, for example on my lappy Nvidia GT420M.Any idea

[Cassio]

I have the same problem with my GT 425M, no solution yet. Until 10.7.4 it worked fine.

[ojpd]

Insert your card's ID into NVDAResman and NVDAGF100Hal, enable GraphicsEnabler then re-install kexts. See nVidia link on first post for details.

 

Forgive me if it's been asked before but how does one insert his dev id to NVDAResman?? I've already done it to NVDAGF100 but don't know where to insert in nvdaresman... Been looking for guides everywhere and been trying trial n error which results in me doing a fresh install all the times i've failed. I've already reinstalled ML 12 times bcoz of the rezman part.. Can't get full resolution on my hack.

System is:

Xeon x5677

Gigabyte x58a ud7 rev2

3 x 2gb

1 x wd black

Gtx570 Sonic platinum

Connected to my monitor via hdmi (which is also getting overscan issues)

Can u give an example regarding the rezman part please??? Please help me. Thanks.

[oldnapalm]

For NVDAResman it's in IOPCIMatch.

http://Olarila.com/forum/viewtopic.php?f=18&t=154

[ojpd]

For NVDAResman it's in IOPCIMatch.

http://Olarila.com/forum/viewtopic.php?f=18&t=154

 

Thanks!

do I edit the whole string including the "0x000010&0x0000ffff" to make it have the same values as the one in my NVADAGF100???

or just the ID part??

string>0x108110de&0x0000ffff

[oldnapalm]

You can leave only your card's ID and delete the rest, in both kexts

<string>0x108110de</string>

[ojpd]

You can leave only your card's ID and delete the rest, in both kexts

<string>0x108110de</string>

 

OMG. Got full resolution now. My eyes can finally rest. THANK YOU SO MUCH SIR!!

[mbze430]

Is there an English version of this post?

http://Olarila.com/forum/viewtopic.php?f=10&t=1339

[artur-pt]

hello

no

use google translator

good hack

[tampasounds]

Removing all the video kexts in single user mode worked for me as well and i was able to create an account and get to the desktop for first time.

Many thanks

I have a question though :

Which kexts do i need to put back to get full color and resolution?

Samsung RF711

Intel Core i7 2630QM @ 2.0GHz Sandybridge

8GB Ram

Intel HD3000 (integrated)

Nvidia GT540M (discreet)

Hitachi SATA2 750gb

[mandeep148]

I have install mac osx8 bootable usb, booted by removing ati 6xxx controller and installed..

Always i run mac by typing graphicsenabler=no -f but without it it wont start...i need guide...

For now please give guide how to enable ati 6870 graphics?

How to backup kext to where?

i m new in hackintosh world

Can any one guide me...Please

[artur-pt]

hello

what u want a step by step, a kext working, i give u a link to see ati graphics...

what have u done, until now ?

post but with questions about u have done ...

now u don't have done nothing ...u don't know nothing about ati graphics ... so read

good hack

[mandeep148]

First i have install mac os x simple by deleting ati 6xxx controller..

and then i download all kext for my system for my pc hardware and install it,

and then i donwlaod multi beast and i select kext and patch for my hardware to install and then after restart my mac works correctly,

But i have these following problems is there any fix?

1.some time at boot of macintosh it gives me "system time in nano seconds 15412555 or bloothooth.........."(somthing like that)at last and after that pc won't start..

2. Mouse is little bit lagy and lag appears when i resizing window, overall it is smooth os..

3. sleep is not working, after it need restart,

U guys are Genius,

Please fix these all issues..

[mandeep148]

Please help install 10.8 all was running perfect after that i update it to 10.8.2 then Macintosh not booting...

Please reply fast...

Image is below..

[dbm]

Please help install 10.8 all was running perfect after that i update it to 10.8.2 then Macintosh not booting...

Please reply fast...

Image is below..

 

Delete OEMSMBIOS.kext

boot with; -v -x

when u get terminal mode type next;

 

mount -uw /

Then;

rm -rf /System/Library/Extensions/FakeSMC.kext/Contents/PlugIns/OemSMBIOS.kext 

Hope it helps, good luck

[MandyC]

So If I follow the instructions, I can get my HD3000 working?

[pernacabeluda]

Yes, configure SMBIOS and inject DualLink property (not needed depending on screen resolution) before re-installing the video kexts

http://Olarila.com/forum/viewtopic.php?f=18&t=2193

[ralpho]

Removing all the video kexts in single user mode worked for me as well and i was able to create an account and get to the desktop for first time.

Many thanks

I have a question though :

Which kexts do i need to put back to get full color and resolution?

Samsung RF711

Intel Core i7 2630QM @ 2.0GHz Sandybridge

8GB Ram

Intel HD3000 (integrated)

Nvidia GT540M (discreet)

Hitachi SATA2 750gb

 

If you ever get you hd3000 to light up let me know.

[abhilash29]

I've Acer 4738Z running intel HD graphics 3400. device id is 0046 and vendor id is 8086. what i'm getting is 1024x768 display. However, the actual resolution is 1366x768. Tried all possible ways like using intel hd 3000 kexts, editing their device and vendor ids but nothing seems to work. I'm running Mountaion Lion 10.8.4. Please help

[artur-pt]

hello

that is not intel hd 3000.. intel hd 3000 only in sandy bridge cpu

only thing u can try is this

http://Olarila.com/forum/viewtopic.php?f=28&t=2961

good hack

[abhilash29]

hello

that is not intel hd 3000.. intel hd 3000 only in sandy bridge cpu

only thing u can try is this

http://Olarila.com/forum/viewtopic.php?f=28&t=2961

good hack

OK ! Will try this procedure and report shortly. Thanks