Jump to content
Cassio

OS X 10.8 Mountain Lion bootable USB

Recommended Posts

xD when you told me don't mess with our image i thought you were talking about me "destroying" your community honor xD that's what i wasn't understanding. :P ( not the installation image xD )


So to be clear i have to go in System/Library/Extensions ( with Transmac ) and delete all the ATI and Intel kexts?


PS : Intel are these

AppleIntelHDGraphicsFB.kext

AppleIntelHDGraphics.kext

AppleIntelFramebufferCapri.kext

AppleIntelFramebufferAzul.kext

AppleIntelCPUPowerManagementClient.kext

AppleIntelCPUPowerManagement.kext

AppleIntelSNBGraphicsFB.kext

AppleIntelLpssSpiController.kext

AppleIntelLpssGspi.kext

AppleIntelLpssDmac.kext


right?

or only


AppleIntelHDGraphicsFB.kext

AppleIntelHDGraphics.kext

AppleIntelFramebufferCapri.kext

AppleIntelFramebufferAzul.kext

AppleIntelSNBGraphicsFB.kext


By the way there are some AppleIntel*.plugin and bundle , should i delete them also?


Thank you !


PS : i re-created a clean image on a USB pendrive so all your kexts etc... will be by default.

PS2 : Your advice worked , i booted without deleting bluetooth etc.. so i'm trying now to install.

Link to comment
Share on other sites

hello


man u don't read nothing .. is only a guess .. what are u doing ?


appleintelcpupowermanagement .. u think is a graphics kext ?


u read the image guide ? i don't think u read...


AppleIntelCPUPowerManagementClient.kext

AppleIntelCPUPowerManagement.kext

AppleIntelLpssSpiController.kext

AppleIntelLpssGspi.kext

AppleIntelLpssDmac.kext


i know is all new.. rsrsrsrs


http://Olarila.com/forum/viewtopic.php?p=13583#p13583


is this u read ?


u don't want to read ? is that ?


appleintelhd*.*


good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Link to comment
Share on other sites

I did what i read only those

AppleIntelHDGraphicsFB.kext

AppleIntelHDGraphics.kext

AppleIntelFramebufferCapri.kext

AppleIntelFramebufferAzul.kext

AppleIntelSNBGraphicsFB.kext


"If boot stops right before reaching the installer, or graphics aren't working right, delete video kexts:

ATI = AMDRadeon* and ATI*

Intel = AppleIntelHD*, AppleIntelSNB* and AppleIntelFramebuffer*

nVidia = GeForce* and NVDA*" that's the link you gave me.


i just wanted to be sure.


-------- UPDATE ---------


Installation COMPLETED !!


Now my problem is that i can't boot on the partition where i installed OS X :

( There is an update 2 below the screens )

B15CjCCl.jpgY8hxpzAl.jpg


-------- UPDATE 2 ---------


I managed to boot os x but i needed to delete the intel kexts in System/Library/Extension of the HDD ( where it is installed ) , it boot great but graphics perfs are sometimes bad , so is there a possibility to boot with a graphic kext?


PS : i see only 64mb of video memory is it normal? i thought it was 512 isn't it?




Thank you for your help !

Link to comment
Share on other sites

i re-added the intel kexts ( not all , for ex: Not intel hd 5000 ) and i can boot without special boot flag , but my only problem is the quality of some animations.


Somebody has the same laptop and managed to have 512mb vram and great render , but he doesn't answer my questions.


If it can help , there is a video where is show the "System report".

">
Link to comment
Share on other sites

hello


the trick is to find u ig-platform-id ...


if u read..


http://Olarila.com/forum/viewtopic.php?f=28&t=3111


http://Olarila.com/forum/viewtopic.php?f=28&t=1716


and u should not delete the kext installed in the hd.. u should make a copy of them.. that kext belong to the system.. and are need to graphics work well


good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Link to comment
Share on other sites

hello every one,


Brightness Control in ML


From the time I've Update ML my Laptops Brightness is not working,HOw can i control my ML's Brightness,by Function keys or by other utility,Now running ML 10.8.1





Thnx in Advance

Dell Vostro 3550, i5-2450M(2.50 GHz-Turbo Boost3.10 GHz) , RAM - 4 GB , Graphic - ATI Mobility Radeon HD 6630m 1GB(Switchable Graphics) , Chipset Intel PCH HM67, Yosmite 10.10/ Win 8.1 Pro x64/ Dualboot Chamelionwizard

Link to comment
Share on other sites

Thanx PimentelX86,



Hello every one



I am Running 10.8.1,I want to update to 10.8.4,How can I achieve this Without Messing with my Current perfect hackintosh.



Kidnly Tell me How to update,I ve 10.8.4 combo


What are the main Prerequisites that i need to do








Thnx in advance

Dell Vostro 3550, i5-2450M(2.50 GHz-Turbo Boost3.10 GHz) , RAM - 4 GB , Graphic - ATI Mobility Radeon HD 6630m 1GB(Switchable Graphics) , Chipset Intel PCH HM67, Yosmite 10.10/ Win 8.1 Pro x64/ Dualboot Chamelionwizard

Link to comment
Share on other sites

Reply -> My problem is that i don't have QE/CI ( and my video card isn't recognized properly -> 64mb vram instead of 512mb and it's quite slow for some animations )


Btw , i know that i need to do something with some numbers list but i don't know where.


->

What i'm supposed to do i think :


ig-platform-id: 01660000, Stolen is FB RAM: 96MB, Pipes: 3, Ports: 4, FBMem: 3

ig-platform-id: 01660001, Stolen is FB RAM: 96MB, Pipes: 3, Ports: 4, FBMem: 3

ig-platform-id: 01660002, Stolen is FB RAM: 64MB, Pipes: 3, Ports: 1, FBMem: 1

ig-platform-id: 01660003, Stolen is FB RAM: 64MB, Pipes: 2 Ports: 2, FBMem: 2

ig-platform-id: 01660004, Stolen is FB RAM: 32MB, Pipes: 3, Ports: 1, FBMem: 1

ig-platform-id: 01660008, Stolen is FB RAM: 64MB, Pipes: 3, Ports: 3, FBMem: 3

ig-platform-id: 01660009, Stolen is FB RAM: 64MB, Pipes: 3, Ports: 3, FBMem: 3

ig-platform-id: 0166000A, Stolen is FB RAM: 32MB, Pipes: 2 Ports: 3, FBMem: 2

ig-platform-id: 0166000B, Stolen is FB RAM: 32MB, Pipes: 2 Ports: 3, FBMem: 2

ig-platform-id: 01620005, Stolen is FB RAM: 32MB, Pipes: 2 Ports: 3, FBMem: 2

ig-platform-id: 01620006, Stolen RAM for FB: 0MB, Pipes: 0, Ports 0, FBMem: 0

ig-platform-id: 01620007, Stolen RAM for FB: 0MB, Pipes: 0, Ports 0, FBMem: 0


I don't know where i need to modify something nor how.



Thanks !

Link to comment
Share on other sites

Reply -> My problem is that i don't have QE/CI ( and my video card isn't recognized properly -> 64mb vram instead of 512mb and it's quite slow for some animations )


Btw , i know that i need to do something with some numbers list but i don't know where.


->

What i'm supposed to do i think :


ig-platform-id: 01660000, Stolen is FB RAM: 96MB, Pipes: 3, Ports: 4, FBMem: 3

ig-platform-id: 01660001, Stolen is FB RAM: 96MB, Pipes: 3, Ports: 4, FBMem: 3

ig-platform-id: 01660002, Stolen is FB RAM: 64MB, Pipes: 3, Ports: 1, FBMem: 1

ig-platform-id: 01660003, Stolen is FB RAM: 64MB, Pipes: 2 Ports: 2, FBMem: 2

ig-platform-id: 01660004, Stolen is FB RAM: 32MB, Pipes: 3, Ports: 1, FBMem: 1

ig-platform-id: 01660008, Stolen is FB RAM: 64MB, Pipes: 3, Ports: 3, FBMem: 3

ig-platform-id: 01660009, Stolen is FB RAM: 64MB, Pipes: 3, Ports: 3, FBMem: 3

ig-platform-id: 0166000A, Stolen is FB RAM: 32MB, Pipes: 2 Ports: 3, FBMem: 2

ig-platform-id: 0166000B, Stolen is FB RAM: 32MB, Pipes: 2 Ports: 3, FBMem: 2

ig-platform-id: 01620005, Stolen is FB RAM: 32MB, Pipes: 2 Ports: 3, FBMem: 2

ig-platform-id: 01620006, Stolen RAM for FB: 0MB, Pipes: 0, Ports 0, FBMem: 0

ig-platform-id: 01620007, Stolen RAM for FB: 0MB, Pipes: 0, Ports 0, FBMem: 0


I don't know where i need to modify something nor how.



Thanks !

 

Use latest Chameleon and I guess that should be fine :)

Acer Aspire v5-571P

Intel Core i5-3317U @ 1.70GHZ

6GB RAM

500GB HDD

Windows 8 64Bit

Link to comment
Share on other sites

After installation from USB, it says successful and then reboots. I have the boot order to set to USB first, but when the USB comes back up, I do not see my HD to boot into the operating system. The partition is set to MBR and I believe it is set to active (although I could use some help in how I can verify it is active). Any help would be greatly appreciated.

Link to comment
Share on other sites

hello


is u hd controller set to ahci ?


or sata mode ?


good hack

 

Soooo looks like I may be out of luck. I was trying to complete this on my old Dell XPS 420 system with bios A07. I don't see any options in the bios to modify the HD controller settings. Unless anyone has any ideas I may be stuck.

Link to comment
Share on other sites


Soooo looks like I may be out of luck. I was trying to complete this on my old Dell XPS 420 system with bios A07. I don't see any options in the bios to modify the HD controller settings. Unless anyone has any ideas I may be stuck.

 


Ok I got the drive to display and chose to boot from the HD where OSX was installed. My new issue is that I get a message that says "still waiting for root device" and a grey box with an "x" through it appears on the screen. Help?

Link to comment
Share on other sites

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Link to comment
Share on other sites

I installed OS X to the hard drive then I go back to boot into the USB and now it doesn't show the hard drive so I cant actually set up OS X I have tried everything I know, Different Hard Drives, Different SATA Operation (AHCI which is default) ATA and Legacy I have NO Idea why this isnt booting I have tried Clover and Chameleon they BOTH don't show it. Please help!

Link to comment
Share on other sites

Hi community,


I try to install Niresh Mountain Lion 10.8.2 on my laptop HP DM1 4136SF (release in 2012).


Here's my config :

• CPU : AMD E-450 dualcore (1.65Ghz)

• Chipset : AMD A50M FCH

• RAM : 4 Go

• HDD : SATA 500 Go

• Graphic processor : AMD Radeon HD 6320



The installation is performed correctly, but at the first boot i have a Kernel Panic. (see pictures)


1381218734-img-20131007-235524.jpg


1381218734-img-20131007-235532.jpg



I can boot my pc only with the bootflag "-x" (Safe Mode),


1381218806-img-20131007-234940.jpg


I think the problem isn't critical, but i can't found the issu at my problem...


So, i hope, you can be help me in my step.


Thanks.


Y.

Link to comment
Share on other sites

probably you can make it better with snow leopard.

Se quando viaja faz o que quer, quando viajar, não leve a mulher ----  No PM support. Use the forum.
.
Dell Latitude i7 8565U 16Gb 256Gb M.2 Intel UHD620 (macOS 14.3) OC

Lenovo Core I5 6200U 8Gb 256Gb HD520 (macOS 14.4b) OC

Ryzen 7 5700X 32Gb 2Tb nvme RTX 3060TI 8Gb (W11)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.





×
  • Create New...