X99 Dual - Kllisre X99 DU99D4

[Jefferson Martins]

Hello guys. I bought a new setup and I would like to know if It possible to install OSX in this configuration:

My setup:

1x Motherboard Kllisre X99 Dual - ZX-DU99D4 V1.11;

2x Xeon E5-2620 3.2GHz;

1x SSD NVME M.2 Samsung PM981A 512GB; 

1x SSD KingDian 1TB SATA3;

4x 16GB Gloway Type A DDR4 2400MHz (Quad Channel);
1x ASUS RX580 8GB GDDR5 AREZ OC;
1x Wifi PCI-E Intel 9260 1600MBPS;

 

If possible, how can I proceed, please?

 

Thank you so much!

Edited November 19, 2020 by Jefferson Martins

[MaLd0n]

-OpenCore Vanilla Guide
https://www.olarila.com/topic/8918-opencore-vanilla-guide-step-by-step-full-dsdt-patched-or-ssdt/

-Clover Vanilla Guide
https://www.olarila.com/topic/5794-hackintosh-guide-install-macos-with-vanilla-olarila-image-step-by-step-install-and-post-install-windows-linux-or-mac/

[greecedrummer]

Hello Jefferson Martins

your Intel WiFi is not supported. All you have to do is install Broadcom WiFi cards.

Coincidentally, yesterday I finished everything you have as hardware, so we are identical except for the WIFI card.

You definitely have to change the EFI, i.e. the config.plist, such as the serial number etc.EFI.zip

[cucu87]

On 11/23/2020 at 3:59 PM, greecedrummer said:

Hello Jefferson Martins

your Intel WiFi is not supported. All you have to do is install Broadcom WiFi cards.

Coincidentally, yesterday I finished everything you have as hardware, so we are identical except for the WIFI card.

You definitely have to change the EFI, i.e. the config.plist, such as the serial number etc.EFI.zip

Hello greecedrummer

Thanks for your EFI!

I used it and I get the a hanging problem (kernel trap), see the image attached

halt_IMG_5029.zip

Is something that I need to do? Like bios settings ...

Thanks in advance!

 

[greecedrummer]

I made this guide for @Jefferson Martins because it specified its hardware.

Without knowing what hardware you are occupying, I cannot help you @cucu87!

 

I sold the mainboard with two E5 2680 V4 Xeons!
It plays a big role for Open-Core whether it is Haswell-E V3 or Broadwell-E V4 because the CPU ID has to be set under Kernel Setting. I spent a whole day analyzing Dortania's Open Core and other users worldwide like them configured it. I have always used EEC RAM modules exclusively for XEON because it is uncomplicated!
I still have the Atermiter DDR4 PC4 2x 16GB REG ECC 2666 MHz that work perfectly with the CPU and mainboard.

If you load the BIOS settings Optimized Default, Open Core works perfectly.

Kernel Panic is due to BIOS and Opn-Core Settings not communicating with each other or incorrect settings being made. You have to read yourself under Dortania.

https://dortania.github.io/Getting-Started-With-ACPI/ssdt-platform.html#high-end-desktop

Try this EFI

Your Intel WiFi will work very, very limited!
You then need it in this Kext

https://github.com/OpenIntelWireless/itlwm

Then you have to enter it in OpenCore and then you can use intel Wifi.

 

I wish you success!

EFI X99.zip

Edited December 28, 2020 by greecedrummer

[cucu87]

3 hours ago, greecedrummer said:

I made this guide for @Jefferson Martins because it specified its hardware.

Without knowing what hardware you are occupying, I cannot help you @cucu87!

 

I sold the mainboard with two E5 2680 V4 Xeons!
It plays a big role for Open-Core whether it is Haswell-E V3 or Broadwell-E V4 because the CPU ID has to be set under Kernel Setting. I spent a whole day analyzing Dortania's Open Core and other users worldwide like them configured it. I have always used EEC RAM modules exclusively for XEON because it is uncomplicated!
I still have the Atermiter DDR4 PC4 2x 16GB REG ECC 2666 MHz that work perfectly with the CPU and mainboard.

If you load the BIOS settings Optimized Default, Open Core works perfectly.

Kernel Panic is due to BIOS and Opn-Core Settings not communicating with each other or incorrect settings being made. You have to read yourself under Dortania.

https://dortania.github.io/Getting-Started-With-ACPI/ssdt-platform.html#high-end-desktop

Try this EFI

Your Intel WiFi will work very, very limited!
You then need it in this Kext

https://github.com/OpenIntelWireless/itlwm

Then you have to enter it in OpenCore and then you can use intel Wifi.

 

I wish you success!

EFI X99.zip 2.53 MB · 1 download

Thanks for looking into this!

I have the following components installed on the board (ZX-DU99D4 V1.11😞
- 2x E5-2699 v3
- MSI VGA Graphic Cards RX 580 ARMOR 8G OC
- 8x Samsung M393A4K40BB1-CRC 32GB DDR4-2400 LP ECC Reg Server Memory

I booted win10 and ubuntu20.04.

I will tinker with the settings and I will let you know.

 

 

[greecedrummer]

I do not understand your problem!
Failed to install Big Sur USB Boot Stick with this new EFI?
Then your BIOS is wrong!
Make sure to do an NVRAM reset and reset system with OpenCore then it should work.

 

If you enter big sur in google ZX-DU99D4 you can get some information. This EFI should be able to start BIG Sur.

[cucu87]

BIOS wrong meaning that I have wrong bios configuration, or just that bios version is wrong?
Do you have a copy of the bios?

I did reset the nvram, I load the optimized bios values, and still getting the kernel panic ...

I also did also
    CSM disabled
    serial disabled
    EHCI Handoff Enable
    Above 4G decoding Enable

and still no improvement ...

 

I am adding the image capture of the bios version, just to clarify the bios information.

bios_ver_capture.zip

[cucu87]

Do you think that is possible that this problem is caused because there are 'too many cores' and this is causing the fault?

Like limitation in ACPI definition?

Any imperfect suggestions?

Thanks in advance!

[cucu87]

Thanks @greecedrummer for your initial help!

I can confirm, the issue seems that is caused by a limitation put in macOS (64). Once that I disabled the hyper-threading (ending with just 2*18 below the limit), then the boot process proceed without problems.

2*18 (ok) < 64 < 2*2*18 (not ok)

You were Ok with yours dual 14 core: 2*2*14 < 64.

It would be Ok also with dual 16 cores: 2*2*16 = 64

For everything that has more than dual 16 core it would become counterproductive.

It would be nice if someone figured (or would figure( out a workaround.

 

 

[cucu87]

Hello greecedrummer,

Can you point to a documentation that establish how to establish these magic numbers for "Fake CPUID" entry?

In dortania this is documented like:
Cpuid1Data: C3060300 00000000 00000000 00000000

In other places this is documented like:

Cpuid1Data: F2060300 00000000 00000000 00000000

Thanks in advance!

 

 

[futureorkun]

Your zx-du99d4 xeon 2678 v3 big sur 11.6.1 sapphire nitro rx 590 EFI share didn't work. Can you share an updated opencore EFI?

[MaLd0n]

5 minutes ago, futureorkun said:

Can you share an updated opencore EFI?

https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/