Administrators MaLd0n 1,001,037 Posted September 24, 2020 Administrators Share Posted September 24, 2020 Download Clover Folder BigSur https://tinyurl.com/ybr968w3  Quirks Configuration check HERE  Test with one USB stick bootable. In some cases need configure Quirks. Disable CSM in BIOS/UEFI setup Enjoy!  Credits: Jief_Machak, Slice and acidanthera team  Some words from Slice  Since rev5123 devs make joined bootloader Clover+OpenCore. It started as Clover using Clover's GUI and ability to change settings and then started OpenCore to inject and patche kexts and start macOS. Starting Windows and other OSes is done by Clover's way. There are new section in config.plist named Quirks that collect setting for OpenCore but some setting is just delegated from Clover because it can change it on the fly. There is a correspondence of OpenCore and traditional Clover settings to easy migrate from OpenCore to new Clover. OpenCore           Clover AppleCpuPmCfgLock  AppleIntelCPUPM AppleXcpmCfgLock    KernelPm DisableRtcChecksum  AppleRTC LapicKernelPanic      KernelLapic About kernel and kext patches there is the follow. 1. OC accounts them as same and name "kernel" in the place of name of kext. Clover has different section for Kernel patches, kexts patches and Booter (boot.efi) patches. 2. Clover deal only with 64 bit arch while OC has "Arch" parameter. Other fields are OpenCore     Clover Base          Procedure Comment     Comment Count        Count Enabled      Disabled Skip          Skip Identifier     Name Find          Find Mask         MaskFind Replace      Replace ReplaceMask  MaskReplace MaxKernel    - MinKernel    - -            MatchOS -            InfoPlistPatch -            RangeFind 3. Procedure name in OpenCore must be long like __ZN8AppleRTC18setupDateTimeAlarmEPK11RTCDateTime Clover can use short name. In the example it can be setupDateTimeAlarm. 4. OpenCore assumes byte mask while Clover assumes bit masking. In the case of 0xFF00FF it will be the same. More careful see documentation for OpenCore and samples for Clover at this page. 5. RangeFind restrict search in Clover by several bytes. I don't know if OpenCore is able do the same. 6. Patches in OpenCore can be "Enabled" by setting the variable while in Clover they are enabled by default. User can disable it in the config.plist or in Clover GUI. 7. For Kernel patches we had additional "StartPattern" and corresponding "MaskStart" to define a place from what we want to search. OpenCore has no such service. Later we will extend the possibility. 4 2 Link to post Share on other sites
tasco11 9 Posted September 24, 2020 Share Posted September 24, 2020 That was a good news. 2 Link to post Share on other sites
zyzz 0 Posted September 24, 2020 Share Posted September 24, 2020 this is https://github.com/CloverHackyColor/CloverBootloader/tree/opencore_integration OpenCore integration branch compiled or some modified clover? Link to post Share on other sites
Kankon 7 Posted September 24, 2020 Share Posted September 24, 2020 thank you very much , work very well Link to post Share on other sites
Сaramel 4 Posted September 24, 2020 Share Posted September 24, 2020 Hi, I have the same hardware as you gigabyte : GA-H97-D3H, CPU 3.5 GHz Quad-Core Intel Core i5 4460, RAM 16 GB 1333 MHz DDR3 I can install Big Sur with Clover but I can't start, what can you tell me?  Link to post Share on other sites
Kankon 7 Posted September 24, 2020 Share Posted September 24, 2020 (edited) 8 minutes ago, Сaramel said: Hi, I have the same hardware as you gigabyte : GA-H97-D3H, CPU 3.5 GHz Quad-Core Intel Core i5 4460, RAM 16 GB 1333 MHz DDR3 I can install Big Sur with Clover but I can't start, what can you tell me?  yes. user same folder EFI CLOVER BS Edited September 24, 2020 by Kankon Link to post Share on other sites
MarceloMustaine 0 Posted September 24, 2020 Share Posted September 24, 2020 MaLd0n, dá pra usar pra instalar ou só para o boot depois de instalado? Link to post Share on other sites
Сaramel 4 Posted September 24, 2020 Share Posted September 24, 2020 5 minutes ago, Kankon said: yes. user same folder EFI CLOVER BS sorry i thought the iron was like mine Link to post Share on other sites
Сaramel 4 Posted September 24, 2020 Share Posted September 24, 2020 that such settings are needed in BIOS to run Big Sur Link to post Share on other sites
阿文 0 Posted September 24, 2020 Share Posted September 24, 2020 The installation card does not move ? Link to post Share on other sites
Сaramel 4 Posted September 24, 2020 Share Posted September 24, 2020 thanks for the work done Jief_Machak, Slice and acidanthera team while testing Link to post Share on other sites
rilav41255 0 Posted September 25, 2020 Share Posted September 25, 2020 Success, but VoodooRMI doesn't work. Link to post Share on other sites
Administrators MaLd0n 1,001,037 Posted September 25, 2020 Author Administrators Share Posted September 25, 2020 need wait some time. devs have a hard work Link to post Share on other sites
阿文 0 Posted September 25, 2020 Share Posted September 25, 2020 (edited)    The installation card does not move ? MB: ASUS p6td deluxe CPU: i7 980x es RAM: DDR3 1600 4G x5 20G VGA: R9 270X 2G MSI 570 8G 17 hours ago, 阿文 said:   Edited September 25, 2020 by 阿文 Link to post Share on other sites
MarceloMustaine 0 Posted September 25, 2020 Share Posted September 25, 2020 Quando tentar dar boot em uma instalação minha já feita com o opencore anteriormente ou no instalador acontece esse kp  1 Link to post Share on other sites
Jay Ward 0 Posted September 25, 2020 Share Posted September 25, 2020 can i try this for laptop ? Link to post Share on other sites
Vatsal Shukla 1 Posted September 25, 2020 Share Posted September 25, 2020 Hello Guys... My PC's Configurations is, Intel Core i7 9700k UHD630(Unlocked), 16gb DDR4 3200mhz RAM. Gigabyte z390 M Gaming LGA 1151 1TB NVMe M.2 SSD Crucial Thinking to buy Radeon rx580 (Can i install macOS without graphics card?) i'm running Ubuntu 20.04 LTS on above PC. Can someone please guide me how to get it done? Please someone help me on this... Â 1 Link to post Share on other sites
Administrators MaLd0n 1,001,037 Posted September 25, 2020 Author Administrators Share Posted September 25, 2020 2 hours ago, Vatsal Shukla said: Hello Guys... hey check our useful links https://www.olarila.com/topic/6129-useful-links/ Link to post Share on other sites
Сaramel 4 Posted September 25, 2020 Share Posted September 25, 2020 On 9/24/2020 at 6:14 AM, MaLd0n said: Clover start work again with BigSur. Thanks to Jief_Machak, Slice and acidanthera team Download Clover Folder BigSur for Desktop Serie 300 EFI CLOVER BS.zip 5.21 MB · 211 downloads Don't use Clover Configurator, use one good plist editor if you need change things in your config.plist. Test with one USB stick bootable. Enjoy! it happens because of the boot file EFI / boot / bootx64.efi how to fix video attached https://radikal.ru/video/eqYUxXnB9nd Link to post Share on other sites
gerard71 1 Posted September 25, 2020 Share Posted September 25, 2020 (edited) the EFI 300 folder worked on Z270 GAMING K3,Macos Big Sur beta 8 ,  I put my dsdt.aml, used the latest version of Clover Configurator to change the smbios for Imac 18.3 and put the usb patches everything works very well  Edited September 25, 2020 by gerard71 1 Link to post Share on other sites
Administrators MaLd0n 1,001,037 Posted September 26, 2020 Author Administrators Share Posted September 26, 2020 6 hours ago, Сaramel said: it happens because of the boot file EFI / boot / bootx64.efi how to fix use full efi folder from first post after u change things like theme etc Link to post Share on other sites
djsnake85 0 Posted September 26, 2020 Share Posted September 26, 2020 Working For Me I have Asus Strix Z390-E i9- 9900-k WX2100 everything works fine with the exception of my PCI Wi-Fi which is not detected and does not appear on the pci list unlike OpenCore which detects it and makes it run, I sent you a screenshot of my pci list Opencore / Colver so that you can see the differance, Clover.zip Opencore.zip Link to post Share on other sites
lclerte 1 Posted September 26, 2020 Share Posted September 26, 2020 On 9/24/2020 at 5:14 AM, MaLd0n said: Clover start work again with BigSur. Thanks to Jief_Machak, Slice and acidanthera team Download Clover Folder BigSur for Desktop Serie 300 EFI CLOVER BS.zip 5.21 MB · 274 downloads Don't use Clover Configurator, use one good plist editor if you need change things in your config.plist. Test with one USB stick bootable. Enjoy! Well! perfect for you but for me: issue on apfs_module_start:2425. and so on.. Any solution ? thanks !! Link to post Share on other sites
Сaramel 4 Posted September 26, 2020 Share Posted September 26, 2020 5 hours ago, djsnake85 said: Working For Me I have Asus Strix Z390-E i9- 9900-k WX2100 everything works fine with the exception of my PCI Wi-Fi which is not detected and does not appear on the pci list unlike OpenCore which detects it and makes it run, I sent you a screenshot of my pci list Opencore / Colver so that you can see the differance, Clover.zip 853.18 kB · 8 downloads Opencore.zip 908.58 kB · 2 downloads look this https://www.google.com/search?client=firefox-b&sxsrf=ALeKk03RrNpF79wcUryH3J_HsLDialXr2Q%3A1601116668860&ei=_BlvX4OBNM6OrwSe75zwDg&q=intel+wireless-ac+9560+kext&oq=Intel+Wireless-AC+9560+kext&gs_lcp=CgZwc3ktYWIQAxgAMgIIADoHCAAQRxCwAzoECAAQQzoGCAAQFhAeULgPWMYZYP4kaABwAHgAgAFgiAGQBJIBATaYAQCgAQGqAQdnd3Mtd2l6yAEIwAEB&sclient=psy-ab 6 hours ago, MaLd0n said: use full efi folder from first post after u change things like theme etc I use the first efi folder for the reason that if I change the bootx64.efi file, it loads normally, and if the file is in the first folder, then the download happens like this https://radikal.ru/video/eqYUxXnB9nd Link to post Share on other sites
-Please Disable Your ADBlocker and Support Our Forum-
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now