Hackintosh Olarila RunMe dumper app

MaLd0n · September 16, 2020

Support Olarila Vanilla Hackintosh by making a donation HERE

About Premium Users you can check HERE

Problems with Paypal HERE

This App extract a full dump from your Hackintosh.

-Spoof your Serial Number (Clover and OpenCore)
-Kextstat
-Pmset
-Xcpm
-ACPI tables
-Kextload
-AudioDeviceName
-VDADecoder Checker
-ig-platform-id
-Ioreg
-Bootargs
-Kernel Version
-Audio Codecs
-Kernel
-System Version
-Full Kextstat
-Cpu
-IOBuiltin
-Boot

Scripts Credits:

black.dragon74, RehabMan, Mirone, cecekpawon, Jacob Salmela, Andy.V, Oldnapalm

rexelens · October 1, 2020

hello here my log..thanks

http://www.mediafire.com/file/12zwq8u6oh217lm/Send_me_chanays-MacBook-Air.zip/file

MaLd0n · October 1, 2020

10 minutes ago, rexelens said:

hello here my log..thanks

DSDT.aml.zip

enable ec0 to ec

Hamed · October 5, 2020

here my log:

https://filebin.net/b64q85d8j6hzyxmz/Send_me_Hameds-iMac.zip?t=uq1vpfzu

MaLd0n · October 5, 2020

42 minutes ago, Hamed said:

here my log

DSDT.aml.zip

giftmusic · October 24, 2020

Hi, just donated to you thank you so much, here is my send me from runme.app

drive.google.com/file/d/1wznrmtFv5VbFUPFJ0e7zig2TnktZ5Uup/view?usp=sharing

MaLd0n · October 24, 2020

5 hours ago, giftmusic said:

Hi, just donated to you thank you so much, here is my send me from runme.app

hey

use it, reboot and extract new sendme

config.plist.zip

giftmusic · October 24, 2020

OK THANK YOU! Here is the new sendme file, with the new config.plist file loaded.

https://drive.google.com/file/d/1oFKf94adx4lwwdIq9ga2cwRIyYnPA0rp/view?usp=sharing

MaLd0n · October 24, 2020

19 minutes ago, giftmusic said:

Here is the new sendme file, with the new config.plist file loaded.

check if work. add dsdt and remove ssdts

DSDT.aml.zip

giftmusic · October 25, 2020

Thank you so much! I replaced the SSDTs and loaded only the DSDT file. I was able to boot. Can you please tell me what this DSDT file did differently from what I had? What will this fix?

Also do you have any other options for a USB kext for the 15 port limit? I tried loading the older ones from here: https://github.com/KGP/XHC-USB-Kext-Library/blob/master/DJ7-iMacPro-ASUS-WSX299S10G-XHCI.kext.zip

but with this when I first boot I get error of an unregistered kext file and the computer wont boot. Any ideas? Thanks!

MaLd0n · October 25, 2020

26 minutes ago, giftmusic said:

Also do you have any other options for a USB kext for the 15 port limit?

check here

https://www.olarila.com/topic/9390-video-guide-usb-port-mapping-with-hackintool/

giftmusic · October 25, 2020

Awesome, I will start working on the USB ports. The first question though: Can you please tell me what this DSDT file did differently from what I had? What will this fix?

Also when I go to my system report under PCI devices it says my GPUs are in slot 1 and 2, but my GPUs are in slots 3 and 5. Will this be an issue?

Thanks

system report.png.zip

MaLd0n · October 25, 2020

5 hours ago, giftmusic said:

Awesome, I will start working on the USB ports. The first question though: Can you please tell me what this DSDT file did differently from what I had? What will this fix?

--DSDT Patches--

-FIX ERRORS AND WARNINGS

-FIX ACPI ERRORS

-REMOVE UNUSED SCOPES / DEVICES

-HIGH PRECISION EVENT TIMER

-SATA SERIE ID

-DMAC

-REMOVE LINES, PROBLEMATIC and UNUSED

-FIX K.P in REBOOT

-NVRAM

-REAL TIME CLOCK

-SLPB

-DARWIN / WINDOWS 2015

-XHCI

-PLUGIN TYPE

-HDAS to HDEF

-HDEF

-ARTC

-IPIC

-TIMR

-SBUS

-BUS1

-MCHC

-ALS0

-SHUTDOWN

-UAR1

-LAN

-FWHD

-USBX

-PMCR

-PPMC

-XSPI

-GMM

-IMEI

-EC

-PNLF

-ARPT

-GFX0

-NVME

-DTGP

-ACQUIRE MUT0 0XFFFF

-OPERATION REGION GPIO

-MUTEX MUT0 0x00

-EXTERNAL REFERENCES

-UNKNOWNOBJ

-HDMI / HDAU

-FULL RENAMED DEVICES

no problem about slot, i dont apply it

giftmusic · October 25, 2020

WOW! thank you for this detailed list.

My Gigabyte Titan Ridge 2.0 thunderbolt card does not work anymore. I flashed the card using CaseySJ method. It was working before DSDT. Please help as thunderbolt is very important.

Also when I boot to windows I get a BSOD saying ACPI error

thunderbolt not working.zip

Edited October 25, 2020 by giftmusic

MaLd0n · October 26, 2020

15 hours ago, giftmusic said:

My Gigabyte Titan Ridge 2.0 thunderbolt card does not work anymore.

hey

check bios/uefi config. nothing about thunderbolt in this dsdt. i think in this cases stay need a ssdt by KGP. let me know

15 hours ago, giftmusic said:

Also when I boot to windows I get a BSOD saying ACPI error

opencore is a big problem for dual boot. inject tables quirks and other things in other systems

giftmusic · October 26, 2020

Ok, can you explain this? "inject tables quirks and other things in other systems" what do I need to do?

Also sleep is not working properly, the fans cycle and the computer turns back on after a few secs.

Here is the Thunderbolt SSDT I am using

SSDT-TB3HP KA.aml

MaLd0n · October 26, 2020

i need one ioreg

about opencore. this bootloader is not good for dual boot, people use a minimal and not full solution with _osi to avoid problem in boot windows

giftmusic · October 27, 2020

Ok I am guessing you wanted me to send you my ioreg file, here it is, thank you

giftstudio.ioreg.zip

MaLd0n · October 27, 2020

1 hour ago, giftmusic said:

Ok I am guessing you wanted me to send you my ioreg file, here it is, thank you

check ur inbox

dm4n · November 3, 2020

Hi, would like to get HDMI working.

Note: I'm using OpenCore v0.60

Runme.app output https://filebin.net/fe99a918499wey1d

Also, where can I check the syntax is correct eg 'array' and '/array' are set correctly?

Update: getting error msg's from the app:

||||||||||||||||||||||||
*----------------------*
Welcome
*----------------------*
||||||||||||||||||||||||
*----------------------*
-----Send Me Files------
*----------------------*
||||||||||||||||||||||||
**********************************************************************************
Run .app and wait! Please don't touch your computer until the program is finished.
**********************************************************************************
****************************************************************************************************
Small donations via PayPal for build, patches and guides development would be extremely appreciated.
****************************************************************************************************
Kextstat...
Pmset Log...
Xcpm Log...
ACPI tables...
Kextload Log...
AudioDeviceName...
VDADecoder Checker...
ig-platform-id Log...
Ioreg Log...
Bootargs Log...
Kernel Version...
Audio Codecs...
Kernel Log...
System Version...
Full Kextstat Log...
Cpu Log...
IOBuiltin Log...
Boot Log...
Clover files (need administrator privileges)
Mounted EFI at /Volumes/EFI
cp: /Volumes/EFI/EFI/CLOVER: No such file or directory
Removing theme dir.
Removing tools dir.
Masking your System IDs
Dumped CLOVER files.
Removing Resources dir.
Removing Tools dir.
Masking your System IDs
Dumped OC files.
Unmounted /Volumes/EFI
Generating system info, this may take a while.
Saving IOReg...
IOREG dump failed. Retrying by increasing delays...
Increased delay by x2 times. Retrying...
IOREG dump failed. Retrying by increasing delays...
Increased delay by x3 times. Retrying...

Thankyou

Edited November 3, 2020 by dm4n

MaLd0n · November 3, 2020

2 hours ago, dm4n said:

Hi, would like to get HDMI working.

use hackintool and create video patch

raymundo bautista · November 5, 2020

Hello, I am using a lenovo ideapad y700 install BigSur, I have problems with shutdown, reboot, sleep, and the battery does not work.

this is the runme output https://drive.google.com/file/d/1stsGn2Pp8C5suB7q4AWI8VBxnJ7R-mBq/view?usp=sharing

Thank you

MaLd0n · November 5, 2020

7 minutes ago, raymundo bautista said:

Hello

use it config.plist.zip reboot and extract new sendme

raymundo bautista · November 5, 2020

3 hours ago, MaLd0n said:

use it config.plist.zip reboot and extract new sendme

done, use the config
this is the result

https://drive.google.com/file/d/1mJBCI30tTw2ziu-2w23DXb86MfYK8vKP/view?usp=sharing

thanks

MaLd0n · November 5, 2020

7 hours ago, raymundo bautista said:

done, use the config

DSDT.aml.zip

REMOVE ALL SSDTs

Sign In

Hackintosh Olarila RunMe dumper app

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation

Hackintosh Tutorials

Hackintosh Tutorials

Support Olarila by making a donation