Search the Community
Showing results for tags 'graphics'.
Found 9 results
So hello, I managed to install macOS Big Sur on my ASUS Laptop (Intel HD 630 i5-10210U). Graphics is working perfectly but the HDMI is not. When I plug a monitor in, the display (built in to the laptop) goes off for a second and comes back; no signal on the monitor. I will attach my OpenCore config and Hackintool screenshot if you need reference. Please help if you can. 🧑💻🥺. https://drive.google.com/file/d/1TLDXmBwrBRIUIie_3kSeIrKmUARn05y7/view?usp=sharing Jenul Screen Shot 2020-11-24 at 09.22.56.zip
Hi @MaLd0n, I just found this post today about performance improvement with Navi and Vega cards thanks to a dedicated SSDT which should properly assign framebuffer : https://www.tonymacx86.com/threads/amd-radeon-performance-enhanced-ssdt.296555/ I tried the method explained here but I didn't noticed any performance change (using Geekbench 5.3.0 Compute benchmark in OpenCL and Metal) So my question is quite simple : did you already implemented this in the DSDT you provided to me ? Or maybe it is directly included in WEG now ? Also, should I use https://github.com/Pavo-IM/AGPMInjector with my config ? (iMac19,1 and MSI RX Vega64) Because as I understood we should have a control-id of 0x12 which is not the case for me as I have a control-id of 0x11 as showed in the screenshot here : https://imgur.com/a/J11MyVi If any case, thank you again for your work and help! Have a nice day MSTRKKRFT
I installed Catalina 15.2 on my dell Inspiron 3593 laptop >Intel Core i3 1005G1 @1.2Ghz ( Ice Lake ) >4 Gb ram >Intel UHD graphics for 10th gen proccessors ( G1) The system boots into mac os but there is no graphics acceleration. Please help.
Hello @MaLd0n just installed bigsur, using Opencore restore guide..everything works fine..but the issue is on graphics..systems seems to lag a lot, not smooth like Catalina, can someone tell where the issue is... the graphics card works well but computer is too slow. Attached is my config.plist regards config.plist.zip
Has anyone around here have tried running macOS on Icelake (i3-1005G1)? Haven't seen any site or post that did so, especially the graphics since there isn't any mac with g1 g2 graphics. Is there a workaround for it like a fakeid for the gpu or something? Would appreciate the help
Hi, First of all, Thank you for make the best Osx86 ISO ever and ever. I have been using Olarila ISO since High Sierra Mojave with no issue at all. Yesterday, I decided upgrade to Catalina 10.5.5 everything work smoothly except two things. 1. Bluetooth not discover any devices. Below is the screenshot. I used to connect my Magic Mouse 2 (white), Magic Mouse 2 (Black), Magic Keyboard, AirPod Pro AirPod 2 with when on Mojave. After fresh install with Olaria Catalima 10.15.5.raw none of these are not working anymore. I've check about mac it found bluetooth. However I'm not sure need to install specific kext or not My motherboard : Gigabyte H370 AORUS GAMING 3 WIFI https://www.gigabyte.com/us/Motherboard/H370-AORUS-GAMING-3-WIFI-rev-10/sp#sp 2. After Wake from sleep mode Display enter to HDR Mode. My Monitor LG-34UK550 4K which support HDR mode https://www.lg.com/us/monitors/lg-32UK550-B-4k-uhd-led-monitor First boot into RGB mode normally. However it force to HDR Mode every single time when awake from sleep GPU = MSI RX 580 ARMOR 8G OC Connect GPU to Monitor via Displayport Even I already checked force RGB Mode still enter HDR Mode My Hackintosh setup CPU : I5 9400F RAM : Consair 16 GB Motherboard : Gigabyte H370 AORUS GAMING 3 WIFI https://www.gigabyte.com/us/Motherboard/H370-AORUS-GAMING-3-WIFI-rev-10/sp#sp GPU : MSI RX 580 ARMOR 8G OC Monitor : LG-34UK550 4K https://www.lg.com/us/monitors/lg-32UK550-B-4k-uhd-led-monitor I copy original EFI Folder from Olaria Catalima 10.15.5.raw in to my EFI Boot Drive. Also attached config.plist for your reference Kext from original EFI Folder too only add AppleALC.kext (v 1.5) to enable on board sound Result from RunMe https://we.tl/t-Wxn6gecnKL Thank you in advance config.plist.zip
Here is the Google drive link for EFI folder and screenshots Guys i have installed Catalina using olarila image in my desktop with this specification i7-3770 Gigabyte h61Ms MOBO 16 GB RAM 120GB ssd ONLY VGA SUPPORT in monitor More detailed spec info is inside the link above. The problem i am facing is in about mac section it's showing only 4MB graphics memory (Intel HD4000 4MB) i have tried many different options from the internet but i am unable to solve it. The most common solution listed everywhere is inject intel and add platform id which is also not working when i am trying to inject intel and appropriate platform id 0x01620005 i am unable to boot it stuck on error gioscreenlockstate 3 (screenshot added in link). However when i am trying random Platform id i am ablr to boot but the graphics is 4MB for example i have used this platform id 0x01600005 and i am able to boot. I am facing problem in Chrome and VS code because of graphics. Please help
Hello guys previously i have posted a question (Link) about graphics issue and finally i fixed that with EDID injection, without EDID i was not able to boot using correct platform id. I am wondering how can we inject EDID in opencore. currently i am using clover and it's very easy in clover to inject EDID, I know opencore has a learning curve but i want to know how to inject EDID in it, please suggest some resources and give some ideas how to do it in opencore.
I installed olarila Catalina 10.15.3 in Lenovo laptop having 8gb ddr3 ram, i7 4510u processor and intel hd graphics 4400. I'm facing graphics problem. I also copy lilu and whatevergreen kext to my mac os efi/clover/kexts/other folder and restart my laptop but it doesn't take any effect and it still showing 4mb graphics. Help me to fix this and i want to boot mac os without usb